DFNA5000FT1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor Networks, Arrays feature an easy method of precisely controlling the voltage, current, and power in circuits. The DFNA5000FT1 is a type of programmable resistor network that can help increase accuracy and reduce cost. This article will discuss the applications and working principles of this type of resistor network.

The main application of DFNA5000FT1 is for precision applications such as industrial systems, automotive controllers, motor control systems, power systems, low voltage power electronics, and medical devices. It is capable of providing high precision current control in a wide range of environments. With the DFNA5000FT1, it is easier to accurately adjust current, voltage, and power in circuits by programming it with the desired values. The DFNA5000FT1 also provides low thermal drift during operation, making it highly suitable for precision applications.

The DFNA5000FT1’s working principle is based on PWM (pulse width modulation). PWM works by rapidly switching on and off power to control the current in the circuits. The switching frequency determines the average current. This means that the higher the frequency, the higher the current, and the lower the frequency, the lower the current.

The DFNA5000FT1 has two terminals: a source terminal and a drain terminal. The source terminal is connected to the ground while the drain is connected to the load. The current is set by adjusting the voltage on the source terminal, while the load voltage is kept constant. When the power is turned on, the voltage on the source increases until it reaches the desired setting. Then the current flows through the drain and the load. The current can be increased or decreased by changing the source voltage up or down.

In addition, the DFNA5000FT1 also uses feedback control to ensure accurate current control. Two different configurations are used for different applications. For precision accuracy, an on-chip potentiometer is used to generate a reference voltage, and an external resistor is connected to the reference terminal. The output current, which is controlled by the gate voltage, is then compared to the reference voltage and is kept constant with a feedback loop.

The DFNA5000FT1 is a versatile resistor network that can be used in many precision applications. The easy to use programming and feedback control provide ideal performance for these applications. By providing high accuracy and low cost, the DFNA5000FT1 makes it an ideal choice for precision applications.

The specific data is subject to PDF, and the above content is for reference