Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Backplane Connectors - DIN 41612

DIN 41612 is a type of backplane connectors designed and produced by DIN-016RPE-DPS-FJ. Backplane connectors are an important and necessary component in electronic engineering, computer engineering and even communication engineering, as they form the circuit, and control the signal frequency and perception or transmitting effects.

Application Field

DIN 41612 backplane connectors are used in the whole system to replace the traditional manual tacking method. It is suitable for interconnection of modules in various kind of systems, as the high - density multiple line - up in the backplane can be used for signal as well as power transmission. It is frequently present in modules of mother boards, rack systems, cabinet system, station assurance system, instrument control, industrial automation system, control equipment, etc.

Working Principle

The connector system of DIN 41612 consists of two parts, cable connectors (mains) and backplane connectors (subs). The cables used are, as known, dependant on the dimension of the interface fit. The signal ports and power source ports are always mounted in the rear end of the equipment. The most common type of this series backplane connector is the 3U version.

The principle of work is such that the signals are connected from the main connector to the motherboard by the plug, then through the motherboard, the cable goes back into the plug. The plug has a direct connection to the main connector, and the communication with other components is made through the contact pins. It is designed and produced such that they conform to the standards like 9 pin, 21 pin, 25 pin, etc.

The components of DIN 41612 include male plug, female plug and stake, etc. It usually comes in 3U type, and is suitable for electrical equipments like computers or testing equipments, control modules, etc.This system has a high level of impact resistance and provides voltage transmission for the system, while maintaining the signal integrity.

Conclusion

In short, DIN 41612 backplane connectors are used when high - density multiple line - up is required for signal and power transmission. The principle of the system relies on the plug connected to the main connector, and further communication is made through the contact pins. It provides electric equipments such as computers, testing equipments, control modules, with high-level resistance and maintains the signal integrity.

These connectors, despite being complicated to install, are still the best choice for designers or engineers when in need of high density and high performance devices.

The specific data is subject to PDF, and the above content is for reference