DK-621-0436-2S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Coaxial Connectors (RF) are a type of antenna connection which allows for the transmission of signals between two antenna systems. In particular, DK-621-0436-2S is a coaxial connector that is used in radio frequency applications. This article will discuss the application field and working principle of DK-621-0436-2S.

DK-621-0436-2S is a coaxial connector that is primarily used for connecting coaxial cables. It consists of a dielectric insulator which is surrounded by a conductor, which is usually made of brass. The dielectric insulator has a low dielectric constant which makes it suitable for radio frequency connections. The conductor has a center pin which is used to connect to the coaxial cable and the outer surface of the connector forms the ground for the connection. This connector is designed to be used in high frequency applications such as cell phone, radio and television signals. Due to its low impedance characteristics, it is also suitable for use in low frequency applications such as GPS and remote sensing.

The working principle of DK-621-0436-2S is based on the principle of electromagnetic waves. When a signal is transmitted through a coaxial cable, an alternating current is generated in the center conductor, which creates a magnetic field. When this magnetic field is in contact with the dielectric insulator, it induces a current in the dielectric. This current is then used to transmit the signal from one antenna to another. The role of the dielectric insulator is to maintain the correct impedance level for the signal to be transmitted without loss. The conductor, on the other hand, provides the ground connection.

In addition to being used for connections between different types of antenna systems, DK-621-0436-2S is also used for connecting external devices such as amplifiers and antennas. Since this connector has a low impedance, it is also suitable for use in high power broadcasting applications. It is important to note that these connectors are not suitable for use in hazardous environments due to the risk of damage from voltage surges.

In conclusion, DK-621-0436-2S is a coaxial connector that is primarily used for connecting coaxial cables. The working principle of this connector is based on the principle of electromagnetic waves. It is suitable for use in high frequency and low frequency applications such as cell phone, radio and television signals, GPS and remote sensing. It is also used for connecting external devices such as amplifiers and antennas. However, these connectors should not be used in hazardous environments due to the risk of damage from voltage surges.

The specific data is subject to PDF, and the above content is for reference