Allicdata Part #: | 1175-1295-ND |
Manufacturer Part#: |
DL-1006 |
Price: | $ 13.47 |
Product Category: | Tools |
Manufacturer: | CNC Tech |
Short Description: | TOOL HAND CRIMPER MODULAR SIDE |
More Detail: | Hand Crimper, Cutter, Stripper Tool Modular - RJ11... |
DataSheet: | DL-1006 Datasheet/PDF |
Quantity: | 42 |
1 +: | $ 12.24720 |
5 +: | $ 11.56680 |
10 +: | $ 10.88640 |
25 +: | $ 10.54620 |
Series: | -- |
Part Status: | Active |
Tool Type: | Hand Crimper, Cutter, Stripper |
For Use With/Related Products: | Modular - RJ11/12 (6p6c) |
Features: | Side Entry |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Crimpers, Applicators, Presses
The DL-1006 is a versatile and widely used crimp, applicator, and press. It has become a standard tool used for assembly of cable, wire, and other electronic circuits. The DL-1006 is suitable for both commercial and industrial applications.
The DL-1006 is an air-powered crimp, applicator, and press. It has a simple, ergonomic design, so it is easy to use. The crimper arm is adjustable for various size wires and terminals. It is designed for high-volume production of reliable connections with minimal operator fatigue.
To begin using the DL-1006, an operator needs to select the correct size and type of terminal for the application. For electrical applications, some common terminal styles are: male and female spade, ring, and U shaped terminals. They come in a variety of sizes based on the diameter and length of the wire. Once the terminal is selected, the operator must place it in the correct position between the two crimpers on the DL-1006.
The DL-1006 is powered by a pneumatic air compressor that supplies up to 6Bar (90PSI) of compressed air. This is used to move the two crimpers to and fro. It also keeps the terminal locked in place during the crimping operation. The amount of pressure that is put on the terminal can be adjusted with the regulator on the machine.
Once the terminal is in place, the operator pulls the lever to move the two crimpers together. This will compress the terminal and form it into the desired shape. The force of the crimp is gauged by a pressure gauge on the side of the machine.
When the lever is pulled, the two crimpers move together along a sliding track. This pushes the metal of the terminal into its desired shape. The amount of force applied to the terminal can be adjusted with the regulator that is located on the side of the machine. Depending on the type of terminal that is used, a crimp gauge may also be used to determine the level of force that has been applied.
The DL-1006 can also be used for applications that require an electrical connection. In these cases, the operator needs to select the correct size and type of ring and spade terminals that will be used. They will be connected with the supplied ring and spade connectors. The connectors will then be crimped to the terminals and locked into place with the DL-1006. The amount of tension that is applied to the terminals can be adjusted with the air regulator.
The DL-1006 is a versatile tool that is used in a variety of applications. It can be used for crimping, applying, and pressing. It is easy to use, reliable, and versatile. With its pneumatic power and adjustable force feature, it helps ensure that the finished product is consistent and reliable.
The specific data is subject to PDF, and the above content is for reference
TOOL HAND CRIMPERHand Crimper Tool
TOOL HAND CRIMPER 10-12AWG SIDEHand Crim...
TOOL HAND CRIMPER TOP ENTRYHand Crimper ...
TOOL HAND CRIMPER PHOTOVOLTAICHand Crimp...
TOOL HAND CRIMPER 14-18AWG SIDEHand Crim...
TOOL HAND CRIMPER COAX SIDEHand Crimper ...