DRQ74-2R2-R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DRQ74-2R2-R is an array of signal transformer designed for high dynamic range and frequency applications. It is also ideal for use in a variety of test and measurement, radar and sensing applications. Its high sensitivity, low distortion, low noise floor and small form factor make it an ideal choice for applications with limited space.

The DRQ74-2R2-R is made up of three main components: two uniform 7x4 arrays of Ceramic Signal Transformer (CST) chips, one 2x4 array of bias resistors, and one 2x4 array of jumpers. Each of the four Ceramic Signal Transformer (CST) chips is wired to the external circuit board via an 8-pin connector. The jumpers allow switching between different applications, such as high voltage, low voltage, and impulse width.]

The DRQ74-2R2-R is designed to work together with other components present in the application system. It offers a high level of flexibility for a wide range of applications. Its flexibility comes from the fact that it can be used in a variety of combinations with other components, depending on the specific needs of the application. It can be used as a high-efficiency (low signal-to-noise ratio) signal converter, or as a low-frequency signal spectrum collection device.

The DRQ74-2R2-R’s operation is based on its two arrays of CST chips, which each receive a voltage signal from the system. These two signals are then combined in a special way that defines the transformer’s parameters. The resulting signal is then passed through the bias resistors and jumpers, which are used to control the signal\'s gain, offset, and routing. This allows the transformer to operate over a wide range of frequencies and amplitudes.

In summary, the DRQ74-2R2-R Array Signal Transformer is a device designed specifically for applications requiring a small form-factor, high dynamic range, and low distortion. It is composed of two 7x4 arrays of Ceramic Signal Transformer (CST) chips, one 2x4 array of bias resistors, and one 2x4 array of jumpers. It offers a high level of flexibility for a wide range of applications and allows the transformer to work over a wide range of frequencies and amplitudes.

The specific data is subject to PDF, and the above content is for reference