Allicdata Part #: | 486-3148-ND |
Manufacturer Part#: |
DS1-175-0005 |
Price: | $ 3.89 |
Product Category: | Filters |
Manufacturer: | Schurter Inc. |
Short Description: | COMMON MODE CHOKE 3A 2LN TH |
More Detail: | 2 Line Common Mode Choke Through Hole 3A DCR 26 m... |
DataSheet: | DS1-175-0005 Datasheet/PDF |
Quantity: | 3 |
1 +: | $ 3.53430 |
10 +: | $ 3.30246 |
20 +: | $ 3.07188 |
50 +: | $ 2.76469 |
100 +: | $ 2.61110 |
200 +: | $ 2.45750 |
500 +: | $ 2.30391 |
1000 +: | $ 2.15032 |
Series: | DS |
Packaging: | Bulk |
Part Status: | Active |
Filter Type: | -- |
Number of Lines: | 2 |
Current Rating (Max): | 3A |
DC Resistance (DCR) (Max): | 26 mOhm |
Voltage Rating - DC: | 600V |
Voltage Rating - AC: | -- |
Operating Temperature: | -40°C ~ 125°C |
Ratings: | -- |
Approvals: | -- |
Features: | -- |
Mounting Type: | Through Hole |
Size / Dimension: | 0.689" L x 0.630" W (17.50mm x 16.00mm) |
Package / Case: | Radial |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes, DS1-175-0005 is designed to provide basic magnetic shielding between two circuits or two points in the same circuit to reduce their capacitive coupling. This type of magnetic shielding offers an effective solution for low level noise problems. It also used to reduce differential mode noise caused by voltage differential between the two conductors or circuits. This type of noise is commonly referred to as EMI and radiated emissions.
Common Mode Chokes, DS1-175-0005 utilizes a combination of cores and windings to create a shield that will effectively reduce high frequency noise from one circuit to another. This device consists of two windings, one with a primary and one with a secondary, which are placed on a common core. The core consists of a ferrite shield which functions similar to an iron shield, isolating the two windings from each other. The core reduces capacitive coupling, reducing high frequency noise from one winding to another.
The primary and secondary windings of Common Mode Chokes, DS1-175-0005 are connected in series and are designed to reduce noise potential through the choke\'s magnetic field. The amount of inductance between the two windings is determined by the number of turns in each winding, as well as the size of the core. The choke also features a shield case that helps to further reduce capacitive coupling.
Common Mode Chokes, DS1-175-0005 are typically used in high speed data transmission circuits to reduce the amount of common mode noise which can adversely affect the performance of the circuit. It is also used to minimize differential mode noise in balanced transmission lines. They are designed to be used with balanced transmission lines for optimum performance. The choke must also be matched to the transmission line for proper operation.
Common Mode Chokes, DS1-175-0005 also has a power rating, which should be taken into consideration when using it in power circuits. It is usually rated up to 1 watt and should not be used in circuits that draw more than 2 watts. Their inductance and capacitor ratings will also need to be checked and matched to the application. The core will need to be clamped down with pressure to ensure a good connection between the winding and the core.
Common Mode Chokes, DS1-175-0005 can be used in a variety of circuit applications. They are commonly used for EMI shielding and RFI reduction in digital circuits, balanced transmission lines, RF circuits and in high power circuits. Common Mode Chokes are an effective tool for eliminating common mode noise and are an essential component of any noise filtering application.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...