Allicdata Part #: | 486-3149-ND |
Manufacturer Part#: |
DS1-20-0001 |
Price: | $ 3.88 |
Product Category: | Filters |
Manufacturer: | Schurter Inc. |
Short Description: | COMMON MODE CHOKE 630MA 2LN TH |
More Detail: | 2 Line Common Mode Choke Through Hole 630mA DCR 7... |
DataSheet: | DS1-20-0001 Datasheet/PDF |
Quantity: | 1000 |
75 +: | $ 3.52674 |
Series: | DS |
Packaging: | Bulk |
Part Status: | Active |
Filter Type: | -- |
Number of Lines: | 2 |
Current Rating (Max): | 630mA |
DC Resistance (DCR) (Max): | 700 mOhm |
Voltage Rating - DC: | 600V |
Voltage Rating - AC: | -- |
Operating Temperature: | -40°C ~ 125°C |
Ratings: | -- |
Approvals: | -- |
Features: | -- |
Mounting Type: | Through Hole |
Size / Dimension: | 0.787" L x 0.787" W (20.00mm x 20.00mm) |
Package / Case: | Radial |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Common Mode Chokes are a type of inductor that are used to reduce the level of EMI, or electromagnetic interference, in electrical systems. The DS1-20-0001 application field and working principle is one of the most commonly used and effective solutions in this area.
First, it\'s important to understand what EMI is and how it can be a problem in electrical and electronic systems. EMI is an electrical disturbance that occurs through the air or along power lines, and it can cause significant interference with the performance of electronic components. In addition to causing performance degradation, EMI can also cause damage to sensitive components in the system.
Common Mode Chokes are used to reduce the level of EMI in an electrical system. They are designed to take two types of signals: Common Mode and Differential Mode. Common Mode signals are those that have equal amplitude in both directions, while Differential Mode signals are those with different amplitudes in each direction. Common Mode Chokes can be used to reduce the Common Mode signals in an electrical system by providing an impedance that is higher than that of the input signal. This will reduce the amount of noise from the signal and therefore improve the system\'s performance.
The DS1-20-0001 is one of the most commonly used Common Mode Chokes. It is designed for applications in which the input signal is typically between 50 MHz and 500 MHz. It provides high common mode impedance at high frequencies and low differential mode impedance at lower frequencies.
When using the DS1-20-0001, it is important to keep a few things in mind. First, it should only be used in environments where the signal level is relatively low. This is because the DS1-20-0001 is designed to work at higher frequencies and therefore the input signal should be relatively low to prevent any overloading of the product. Secondly, it\'s important to keep the physical size of the DS1-20-0001 in mind, as it needs to fit into the available space in the system. Finally, the DS1-20-0001 should be mounted in an area with good air flow, as the product needs to remain cool in order to perform correctly.
Overall, the DS1-20-0001 is a great product for reducing the amount of EMI in electrical and electronic systems. It is designed to reduce Common Mode signals, which are those that have equal amplitude in both directions. Its high common mode impedance makes it effective in reducing signal noise, while its small physical size and low input signal requirement make it an ideal choice for a variety of applications.
The specific data is subject to PDF, and the above content is for reference
CMC 100MH 400MA 2LN TH100mH @ 10kHz 2 Li...
COMMON MODE CHOKE 27MH 1A 2LN TH27mH @ 1...
CMC 3.3MH 1.2A 2LN TH3.3mH @ 10kHz 2 Lin...
COMMON MODE CHOKE 13MH 2A 2LN TH13mH @ 1...
COMMON MODE CHOKE 1.3A 2LN TH2 Line Comm...
COMMON MODE CHOKE 1MH 20A 2LN TH1mH @ 10...