DS1-25-0003

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes, specifically the DS1-25-0003, is used to couple out-of-phase signals while allowing in-phase signals to pass through. It is designed to block high frequency signals while permitting low frequency signals to pass. The notion of a common mode choke relies on the idea that two conductors with two signals traveling in opposite directions can convey an electromagnetic field that cancels out if both signals are exactly out of phase from one another. In effect, the choke reduces any noise or interference that could be generated from the signals.

The DS1-25-0003 consists of a durable plastic enclosure with two attached cables. Inside each cable is a coil of wire. A ferrite core holds the coils in place. The coil configuration is designed to create an inductor with low losses at the working frequency when an AC current is passed through it. The current flows through both coils, but in opposite directions. This creates its electromagnetic field that is oriented in circles, like the diagram below.

The DS1-25-0003 provides its best performance when used in a two-wire system. In this configuration, the two cables are connected, so that a differential signal travels along both cables. The signals flow through both coils, with the opposing signals resulting in the currents flowing in opposite directions. This creates a balanced electromagnetic field, so the disturbance is cancelled out. This ensures that only the in-phase signals will pass through the choke, while any out-of-phase signals will be coupled out of the signal path.

The DS1-25-0003 is most often used in low-frequency applications. It is commonly found in remote control systems, where it is employed to reduce the irritating noise and interference created by signals that are out of phase from one another. It can also be used in applications where high-frequency signals must be blocked from passing through. The choke is designed to provide high-isolation in low frequency signals, and low-level isolation in higher frequency signals.

The DS1-25-0003 is a valuable component when it comes to reducing both noise and interference. Its ability to couple out-of-phase signals while allowing in-phase signals to pass through has made it an invaluable tool in radio frequency applications. Its dependable performance, combined with its low cost, make it a popular choice for those looking to protect their RF signals.

The specific data is subject to PDF, and the above content is for reference