DSC1001CL2-024.0000T

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	15µA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.126" L x 0.098" W (3.20mm x 2.50mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	6.3mA
Operating Temperature:	-40°C ~ 105°C
Series:	DSC1001
Voltage - Supply:	1.8 V ~ 3.3 V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	24MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

Oscillators are used in many applications to provide a periodic, steady source of electronic or electrical signals. Oscillators are used in a wide range of electronic components, including radio transmitters, audio equipment, computers, and other electrical equipment. One of the most commonly used oscillators is the DSC1001CL2-024.0000T.The DSC1001CL2-024.0000T is a voltage-controlled crystal oscillator that is used to generate a frequency signal of 24MHz. It has a low phase noise and provides very good spectral purity. The crystal for this oscillator is an AT pin-type crystal, and the oscillator circuit utilizes a voltage-controlled tunnel-diode amplifier with a variable capacitance cell to provide the oscillations.The DSC1001CL2-024.0000T oscillator is commonly used in a variety of applications, such as Radio Frequency Identification (RFID) and satellite communications. It is also used in frequency stabilization, timekeeping, signal synthesis, and frequency calibration applications. This oscillator is typically used in industrial and commercial applications, and it is very reliable and accurate.Most oscillators are based on the same basic principle. They use a steady signal, usually generated by an electrical circuit or crystal, and then use feedback to regulate the flow of the signal, allowing it to be “tuned” to a specific frequency. This feedback helps to ensure that the signal remains at the same frequency and level, even when conditions change.In the case of the DSC1001CL2-024.0000T oscillator, the crystal generates the frequency signal. The oscillator circuit then “tunes” the signal to the desired frequency by using the voltage-controlled tunnel-diode amplifier and the variable capacitance cell. The crystal output is buffered through a voltage follower stage, and the signal is then used to control the oscillator. This process ensures that the signal is steady over a wide frequency range.The DSC1001CL2-024.0000T oscillator is an excellent choice for applications where a high level of stability and accuracy is required. The voltage-controlled oscillator design is more robust than many other oscillator designs, and it is typically more cost effective. The oscillator’s low phase noise and excellent spectral purity make it well suited for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description