DSC1001DL5-020.0000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are any type of electronic circuitry which performs alternating operations of two or more inputs. The oscillator, DSC1001DL5-020.0000T is a frequency-stabilized 2kW power oscillator specifically designed for applications in mobile communication systems. It is capable of providing a clean and stable signal with a noise reduction capability of up to 10dB and an adjustable output frequency range of 8MHz to 35MHz.

DSC1001DL5-020.0000T Application field

The DSC1001DL5-020.0000T is ideal for applications in mobile communication systems which require a high degree of frequency stability and low noise output. Its output is compatible with all international mobile communication standards such as AMPS, GSM, CDMA and 3G/4G/Wi-Fi. As such, it can be used in base station equipment, radio terminal equipment, etc. for frequency synthesizing, modulation, demodulation and noise reduction. Also its wide frequency range makes it suitable for use in emerging wireless communication systems such as predictive spectrum sharing, cognitive radio and dynamic spectrum access.

DSC1001DL5-020.0000T Working Principle

The DSC1001DL5-020.0000T operates on the principles of PLL (phase-locked loop) and negative feedback oscillator design. It contains a voltage-controlled oscillator (VCO) that is used to generate an alternating signal. The VCO is fed with a reference frequency signal from a quartz crystal in order to ensure an accurate and stable output frequency. The precision of the output frequency is ensured by employing the Negative Feedback Oscillator (NFO) technique and integrating a low frequency passive filter. The oscillator signal is then amplitude modulated (AM) by a Low Power Amplifier (LPA) before being sent to the antenna.

The DSC1001DL5-020.0000T utilizes an advanced PLL synthesis circuit design, combined with an NFO-based frequency stabilization technique, in order to provide a frequency accuracy of up to 0.1 Hz accuracy over an adjustable output frequency range of 8 MHz to 35 MHz. The PLL circuit locks the output signal to the frequency of the reference signal and prevents any deviations or loud noises to occur. The low power amplifier further makes sure that the amplitude of the signal is consistent, by automatically adjusting it to the proper level for the communication system in use.

Conclusion

The DSC1001DL5-020.0000T is an advanced, frequency-stabilized 2kW power oscillator specifically designed for applications in mobile communication systems. It utilizes a PLL synthesis circuit and an NFO-based frequency stabilization technique to ensure accuracy and stability, and an adjustable output frequency range of 8MHz to 35MHz for flexibility. It is capable of providing a clean and stable signal with a noise reduction capability of up to 10dB for the demanding task of frequency synthesizing, modulation, demodulation and noise reduction.

The specific data is subject to PDF, and the above content is for reference