DSC1030BE1-008.0000

Frequency Stability:	±50ppm
Current - Supply (Disable) (Max):	1µA
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.197" L x 0.126" W (5.00mm x 3.20mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	3mA (Typ)
Operating Temperature:	-20°C ~ 70°C
Series:	DSC1030
Voltage - Supply:	3V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	8MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Oscillators are electronic circuits that generate alternating electrical signals, or oscillations, at a nearly constant frequency. They are used in many applications, from communication systems to computer clocks and even radar and medical imaging.The crystal oscillator (XO) is one specific type of electrical oscillator, and it employs a quartz crystal as its main component. The model DSC1030BE1-008.0000 is an example of an 8MHz crystal oscillator from the company Distributor Supply Co. In this article, we will discuss the application fields and working principle of this oscillator.

Applications of the DSC1030BE1-008.0000 Crystal Oscillator

The DSC1030BE1-008.0000 crystal oscillator can be utilized in a variety of applications such as communication systems, consumer electronics, and embedded systems. In communication systems, the oscillator is used to convert the frequency of the signal sent by a transmitter to the desired frequency or range designated by the receiver. It is also used in synchronizing radio signals. The crystal oscillator can be used in consumer electronics such as radios, televisions, personal media players, and video game consoles. It is employed to stabilize the frequency and improve the accuracy of the signals being sent or received.The oscillator is also utilized in embedded systems such as process controllers, medical devices, and aerospace systems. It is used to keep track of time and accurately timing of an operation.

Working principle of the DSC1030BE1-008.0000 Crystal Oscillator

The DSC1030BE1-008.0000 crystal oscillator is based on the piezoelectric effect, where a voltage is applied to a quartz crystal and the crystal responds by vibrating. The quartz crystal produces a frequency that can be adjusted by changing the voltage. The oscillator is composed of two parts – the crystal oscillator circuit and the crystal itself. The crystal oscillator circuit is a closed loop amplifier that is used to amplify the output of the crystal and stabilize the frequency. This circuit amplifies the frequency and the voltage is used to adjust it. The crystal oscillator circuit consists of several components such as a feedback resistor, a ground pin, a reference voltage, a capacitor, and a transistor. The feedback resistor and capacitor form a feedback network that regulates the frequency and the ground pin is used to supply the oscillator circuit with power. The reference voltage is used to set the desired frequency and the transistor is used to switch the circuit on and off.

Conclusion

The DSC1030BE1-008.0000 crystal oscillator is a reliable and accurate 8MHz oscillator from Distributor Supply Co. It can be used for a variety of applications, such as communication systems, consumer electronics, and embedded systems. The working principle of the oscillator is based on the piezoelectric effect, where a quartz crystal vibrates when a voltage is applied to it. The frequency can then be adjusted by changing the voltage. The oscillator circuit consists of components such as a feedback resistor, a ground pin, a reference voltage, a capacitor, and a transistor, which work together to amplify the frequency and stabilize it.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description