DSC1101AM2-014.3950

Frequency Stability:	±25ppm
Current - Supply (Disable) (Max):	--
Height - Seated (Max):	0.035" (0.90mm)
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Package / Case:	6-SMD, No Lead Exposed Pad
Mounting Type:	Surface Mount
Ratings:	--
Current - Supply (Max):	95µA
Operating Temperature:	-55°C ~ 125°C
Absolute Pull Range (APR):	--
Series:	DSC1101
Voltage - Supply:	2.25 V ~ 3.6 V
Output:	CMOS
Function:	Standby (Power Down)
Frequency:	14.395MHz
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

<p>DSC1101AM2-014.3950 is a type of oscillator. An oscillator is a circuit that generates an electrical signal over a wide range of frequencies, usually a sinusoidal waveform. It can have many applications, ranging from communications technology, medical treatments to industrial process control.</p><p>Oscillators are used in a variety of applications including radio transmission and reception, test and measurement, computers and consumer electronics. They can be used for modulation (control of energy) or as a source of noise.</p><p>The DSC1101AM2-014.3950 oscillator is an electronic circuit that works by amplifying an input signal and repeatedly sending it back and forth between two stages or amplifiers. This produces a sine wave output. This type of oscillator is known as an amplifier-coupled oscillator.</p><p>In a typical amplifier-coupled oscillator, a small signal is fed into a differential amplifier circuit, and the output is sent to an output stage. The output stage is also known as a power amplifier and amplifies the signal so that it can drive a speaker or other load. The output of the power amplifier is then connected to the input of the differential amplifier, where the original signal is amplified again and sent to the output stage. This process is repeated to produce a sine wave, or other waveform depending on the application.</p><p>The DSC1101AM2-014.3950 oscillator is used in applications such as radio transmission, military communication systems, medical imaging systems, and industrial automation. It is also suitable for modulating signals in test and measurement equipment. This type of oscillator has a tunable frequency range, which makes it ideal for these applications.</p><p>The DSC1101AM2-014.3950 oscillator has a number of advantages such as low power consumption, low cost, and small size. Its tunable frequency range allows it to be used in a variety of applications, and its high frequency accuracy ensures that it can be used as a precise signal source. The low power consumption and small size also make it a good choice for battery powered and portable applications.</p><p>Oscillators are an important part of today\'s electronic circuits, and the DSC1101AM2-014.3950 oscillator is a valuable addition to any applications that require an accurate tuned signal source. It is an ideal choice for applications such as radio transmission, military communication systems, medical imaging systems, and industrial automation.</p>

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description