DSC2010FI2-A0018T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin Configurable/Selectable Oscillators, or PCOSs, are oscillators that can be configured and/or selected at the pin level and are used in a variety of applications, ranging from smartphones and tablets to embedded systems, digital and analog waveform generation, and a wide range of other control and data processing applications. The DSC2010FI2-A0018T is a prime example of such a PCOS, and this article will explore the capabilities of this device and its application field and working principle.

The DSC2010FI2-A0018T is a two-pin configurable/selectable oscillator featuring a wide oscillation frequency range from 1kHz to 200MHz and a low voltage range of 1.8V to 3.63V. It offers a wide variety of outputs including LVPECL, LVDS, HCSL and CML and is also rated for high temperature operation from -40 to +85C. In terms of output accuracy, the DSC2010FI2-A0018T offers a maximum ppm variation of 500, indicating that the maximum frequency variation is 5 parts per million over a temperature range of -40 to +85C.

The real-time frequency configuration of the DSC2010FI2-A0018T is made possible through the device‘s built-in frequency selection pins. When two input signal pins of logic 0 or 1 are fed into the DSC2010FI2-A0018T, the output will remain in standby mode until the signal pins are correctly configured and selected, changing the output frequency to the desired frequency, then the output will start to oscillate. This allows the user to adjust the frequency based on their application’s needs, while still maintaining the reliable stability of a standard oscillator.

In terms of applications, the DSC2010FI2-A0018T is ideally suited for a wide range of products, including smartphones and tablets, but also embedded systems, digital and analog waveform generation, and a variety of other control and data processing applications. In smartphones and tablets, the device can be used to capture the movements of an accelerometer or gyroscope, while in an embedded system, it can be used as a timing reference for data acquisition and power management. As for digital and analog waveform generation, the oscillator can generate waveforms for PWM, triangular and sine waveforms for a variety of control systems, and for data processing applications, the device may be used for complex data rate conversion tasks.

The DSC2010FI2-A0018T is also very easy to use, with its high input sensitivity and low output skew, allowing for quick and accurate setup and configuration in a variety of applications. Moreover, the device has an excellent EMC performance, meaning that it will not interfere with other equipment and components in the application. Lastly, the device is designed to have a long life and reliable operation in high-temperature environments, making it an ideal choice for industrial applications.

In summary, the DSC2010FI2-A0018T is a two-pin configurable/selectable oscillator that offers a wide range of frequencies and low voltage range, a variety of outputs, and excellent EMC performance, making it ideal for applications ranging from smartphones and tablets to embedded systems, digital and analog waveform generation, and a variety of other control and data processing applications. Its easy setup and configuration, combined with its reliable operation in high-temperature environments, make it a great option for any application that requires an oscillator.

The specific data is subject to PDF, and the above content is for reference