DSC2011FL1-E0002

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Pin configurable/selectable oscillators are an important class of oscillators that allow users to quickly select an appropriate device for their specific applications and benefit from it.

The DSC2011FL1-E0002 is an excellent example of such a device; it is a cost-effective, lead-free device with an in-circuit frequency selectable feature. It is designed for use in a wide range of applications, such as in audio, communication, network and automotive systems.

The device operates within a wide frequency range of 4 MHz to 280 MHz, with its frequency adjustable via four pins. It features a number of fixed frequency options and also provides a selectable frequency-hopping function.

The DSC2011FL1-E0002 provides four frequency select options that make it easy to tailor the device for specific applications. These options are a reference frequency, a clock frequency, a pull-up frequency and a pull-down frequency.

Its reference frequency, or REF, is the starting point for frequency selection. The device\'s clock frequency, or CLK, is the highest frequency that can be selected for the device. The pull-up frequency, or PU, is the frequency at which the device will remain active once its frequency selection process is complete. Finally, the pull-down frequency, or PD, is the frequency at which the device will remain inactive once its frequency selection process is complete.

The device\'s frequency selection process is relatively simple, and can be performed with a multimeter. First, the pin on the device which will be used to select the frequency must be connected to ground, while the other three pins are left open. Then, the voltage applied to each pin is measured. Depending on the voltage values, the frequency of the device can be determined.

In addition to its pin configuration, the DSC2011FL1-E0002 also offers an interesting feature called frequency hopping. When this feature is enabled, the device will periodically "hop" between two or more predetermined frequencies. This function can be used in communication or networking applications as a means of avoiding interference from other signals or as a security measure.

The DSC2011FL1-E0002 is an excellent choice for applications where in-circuit frequency selection is required. It offers a wide range of frequency options, simple frequency selection and frequency-hopping functionality, making it an ideal choice for use in a variety of applications.

The specific data is subject to PDF, and the above content is for reference