DSC6001CE1A-025.0000T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

An oscillator is a circuit or device used to generate a repetitive electrical waveform. It can be a mechanical, electrical or electronic device, and be used for various applications. The output waveform of an oscillator can be sinusoidal, square, triangular and sawtooth, depending on its design. One particular oscillator that is widely used is the DSC6001CE1A-025.0000T.

Application Field of DSC6001CE1A-025.0000T

DSC6001CE1A-025.0000T is a high-performance voltage-controlled oscillator (VCO) developed by Rakon Corporation. It is mainly used in the fields of navigation and positioning, communications and sensing, etc. It has been designed as a reliable source of RF signal in various systems and provides a high level of accuracy and stability. The DSC6001CE1A-025.0000T can operate up to a maximum frequency range of 0.01MHz to 200MHz and a temperature range of -20°C to +85°C. It is also built with an adjustable supply voltage of 4.75V to 6V, and a high-performance analog control for precise frequency control. Its high purity crystal resonator ensures superior accuracy and stability, meeting the requirements of advanced terrestrial navigation systems.

Working Principle of DSC6001CE1A-025.0000T

The DSC6001CE1A-025.0000T is an oscillator based on the PLL (phase-locked loop) principle. It consists of three sections - a phase-frequency detector (PFD), a voltage-controlled oscillator (VCO) and a loop filter (Figure 1). The PFD compares the phase of the reference signal with the phase of the VCO output in order to generate the control signals for the VCO. The loop filter is an electronic circuit that is used to produce a signal with a certain frequency from the PFD outputs. Its purpose is to reduce any noise or variations in the signal and stabilize the frequency.

Figure 1: Block diagram of the DSC6001CE1A-025.0000T oscillator

The oscillator\'s output signal is generated by the VCO. The VCO is a circuit that generates an output frequency proportional to a given input control voltage. It is powered by the reference signal and produces a signal that is locked to the reference signal\'s frequency. The amplitude and frequency of the VCO output can be adjusted by varying the voltage. This is done by the loop filter, which feeds back the output of the PFD to the VCO. The loop filter also acts as a buffer, isolating the VCO from any disturbances and ensuring a stable frequency.

The frequency of the DSC6001CE1A-025.0000T can also be adjusted manually by means of an external reference input. This allows users to fine-tune the output frequency of the oscillator, offering greater accuracy and stability. Furthermore, the DSC6001CE1A-025.0000T has low power consumption and a wide frequency range, making it ideal for applications in both consumer devices and industrial systems.

Conclusion

The DSC6001CE1A-025.0000T oscillator is an advanced and reliable voltage-controlled oscillator (VCO) designed by Rakon Corporation. Its main application lies in the field of navigation and positioning, communications and sensing, among others. It has a wide frequency range of 0.01MHz to 200MHz and a temperature range of -20°C to +85°C. It also has an adjustable supply voltage of 4.75V to 6V and high-performance analog control for precise frequency control. The oscillator also has low power consumption and a high purity crystal resonator for superior accuracy and stability. The frequency can also be adjusted manually by means of an external reference input. The DSC6001CE1A-025.0000T oscillator is thus ideally suited for a wide variety of applications in both consumer devices and industrial systems.

The specific data is subject to PDF, and the above content is for reference