DSC6011MI2A-048.0000

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An oscillator is an electrical circuit that produces a periodic, oscillating electronic signal. Oscillators usually consist of layered components including the power supply, the amplifier, the feedback loop, and/or the oscillator circuit. The oscillator signal is produced by amplifying an input signal, usually at a frequency determined by a resistor and capacitor components, and then using a feedback loop to maintain the same frequency. The DSC6011MI2A-048.0000 is an example of an oscillator in the form of a crystal oscillator with a 0.48 MHz center frequency.

The DSC6011MI2A-048.0000 crystal oscillator is a piezoelectric device that generates an output frequency determined by the size, shape, and orientation of the crystals. It is typically used in applications where tight control of the frequency is critical, such as in radio frequency (RF) circuits, microcontroller systems, and clock generator circuits. The oscillator operates using a feedback loop in which an input signal is amplified and then the amplified signal is fed back into the input, resulting in an oscillating signal for the output. The adjusted signal is passed through a frequency-selective filter to remove any off-frequency components and then output as a square wave, sinewave, or triangle wave with a specific frequency.

The DSC6011MI2A-048.0000 can be used in a variety of applications including microcontrollers, digital electronic circuits, clocking systems, and radio communications. The crystal oscillator offers low power consumption, high stability, accurate frequency control, and good signal-to-noise ratio. The specific frequency is determined by the size and shape of the crystal, and can be changed for specific applications. For example, tuning circuits can be used to fine-tune the frequency to an exact value so that the oscillator can be used for communications or measurement applications.

In addition to its application in electronic circuits, the DSC6011MI2A-048.0000 crystal oscillator can be used in medical applications, such as ultrasound machines and electrocardiograph (ECG) devices, as well as scientific instruments, such as atomic clocks and spectroscopes. The crystal itself can be used as the resonator, or it can be put into a circuit with other components to create a complete electronic oscillator. In either instance, the crystal oscillator is an important component for accurately timing signals and controlling frequency.

The specific data is subject to PDF, and the above content is for reference