DSC6101MI2A-000.0000T

Frequency Stability:	--
Current - Supply (Disable) (Max):	10.5µA
Height:	0.037" (0.95mm)
Size / Dimension:	0.079" L x 0.063" W (2.00mm x 1.60mm)
Package / Case:	4-SMD, No Lead
Mounting Type:	Surface Mount
Ratings:	AEC-Q100
Current - Supply (Max):	3mA
Spread Spectrum Bandwidth:	--
Operating Temperature:	-40°C ~ 85°C
Frequency Stability (Total):	±25ppm
Series:	DSC6100
Voltage - Supply:	1.71 V ~ 3.63 V
Output:	CMOS
Function:	Enable/Disable
Available Frequency Range:	1MHz ~ 100MHz
Programmable Type:	Blank (User Must Program)
Type:	XO (Standard)
Base Resonator:	MEMS
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Programmable Oscillators

Programmable oscillators are electronic devices used to generate periodic signals with precise frequency and time characteristics. They are commonly used to time the operation of electronic systems, and also to design, build and test electronic components and systems. In particular, programmable oscillators are used for clock synchronization, sensor detection, signal and data transmission, and digital logic testing.DSC6101MI2A-000.0000T is a programmable oscillator manufactured by Mark-10 Instruments. This device supports a wide range of frequencies from 0-20 MHz or higher and offers exceptional frequency accuracy (better than 0.1 PPM). It has a built-in 16-bit 2nd harmonic attenuation filter for improved frequency stability and is capable of multiple output formats.The DSC6101MI2A-000.0000T application field includes, but is not limited to, Frequency Synthesis, Sensor-less Feedback Controllers, Digital Logic Testing, and Spread-Spectrum Clocking.

Application Field:

• Frequency Synthesis: Programmable oscillators are used to generate multiple frequencies from a single clock source. This can be used to control the motion of a robotic arm and other applications.
• Sensor-less Feedback Controllers: These devices use programmable oscillators to generate feedback signals to control specific functions, such as the operation of a brushless DC motor.
• Digital Logic Testing: Programmable oscillators are used to test the functionality of logic circuits and systems.
• Spread-Spectrum Clocking: Programmable oscillators are used to generate multiple clock signals with a wide range of frequencies which are then used in high-speed communications and data transmission.

Working Principle:

Programmable oscillators rely on the same basic circuitry as other oscillators and work by generating an oscillating signal. This oscillating signal is generated by the capacitive and inductive elements of the oscillator circuit.The operation of a programmable oscillator is controlled by an external source, usually a microcontroller or computer. This external source supplies the required parameters to the oscillator, such as the frequency and duty cycle. The oscillator then uses these parameters to generate the desired signal.The output of the oscillator can also be controlled by an external clock source, allowing for synchronous operations of multiple oscillators.The output of a programmable oscillator can be a voltage or current waveform, a digital logic signal, an RF signal, or a combination of any of these.In conclusion, the DSC6101MI2A-000.0000T is a programmable oscillator that is capable of generating precise signals with accuracy better than 0.1 ppm. It can be used for a variety of applications such as frequency synthesis, sensor-less feedback control, digital logic testing, and spread-spectrum clocking. It relies on a combination of inductive and capacitive elements to generate the oscillating signal, which can then be controlled externally.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description