DVK-RM024-P10-C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The DVK-RM024-P10-C is a development kit used for evaluating and development of RF boards. The kit consists of a transmit/receive module, an evaluation board, and a user-programmable BASYS2 microcontroller. The evaluation board and BASYS2 microcontroller can be used to program, debug, and evaluate a variety of wireless applications using a wide range of RF protocols. The evaluation board features a signal generator, RF filter, RF switch, and a reference oscillator. The BASE2 microcontroller offers a 32-bit Cortex-M architecture, 8 kBytes of SRAM and 64 kbytes of Flash memory, and built-in USB and Serial Port debugging interfaces.

Applications for the DVK-RM024-P10-C typically include wireless communication systems (such as Bluetooth, Zigbee, and WLAN), remote sensing systems, RFID and short-range data communication systems. The kit can also be used to evaluate system-level performance of wireless systems using various radio frequency protocols such as GPRS, EDGE, and WiMAX. Additionally, the kit is suitable for antenna design, RF testing, and signal measurement.

The working principle of the DVK-RM024-P10-C is based on the concept of RF modulation and demodulation. Through modulation, a given signal or information is embedded into a radio frequency carrier. The modulated signal is then transmitted via an antenna or other wireless medium. At the receiver, the modulated signal is demodulated to extract the embedded information. The DVK-RM024-P10-C contains all the components necessary for RF modulation and demodulation. It is designed for easy evaluation and debugging of RF systems.

The transmit/receive module can be used to generate complex modulation signals for testing and development of RF communication systems. The signal generator module can generate a wide range of modulations including QAM, DQPSK, and FSK. It is also capable of test tone modulation and phase-modulated signal generation. The RF filter is used to establish the desired signal strength and control signal interference. The RF switches are used to select the appropriate antenna for reception or transmission. The reference oscillator provides the time synchronization necessary for proper communication between the transmitter and receiver.

The BASYS2 microcontroller provides programming and debugging capabilities for the system. It can be used to configure the signal generator and RF components in order to configure a wireless communication system according to the specific requirements of the application. The microcontroller also supports various software development tools such as compilers and debuggers.

The evaluation board is used to verify the functionality of the system by providing various test points, connectors, and circuits. These can be used to monitor the output of the signal generator, analyze the performance of various RF components, and verify that the communication signal is encoded properly.

In summary, the DVK-RM024-P10-C is an evaluation and development kit used for designing, testing, and evaluating wireless systems. It contains a transmit/receive module, an evaluation board, and a BASYS2 microcontroller for programming and debugging the system. The working principle of the system is based on the concept of RF modulation and demodulation and the kit provides all the necessary components for implementing this.

The specific data is subject to PDF, and the above content is for reference