E-TA2012 10DB N1

Series:	--
Packaging:	Bulk
Part Status:	Obsolete
Attenuation Value:	10dB
Frequency Range:	0Hz ~ 3GHz
Power (Watts):	63mW
Impedance:	50 Ohms
Package / Case:	0805 (2012 Metric)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators – E-TA2012 10DB N1 Application Field and Working Principle

Attenuators are electronic components used for controlling the power levels of a circuit. They are most commonly used in telecommunications systems, such as mobile phone antennas, DSL modems, and fiber optic networks. The E-TA2012 10DB N1 is a programmable attenuator, which means that it can be adjusted to different power levels depending on the needs of the application.The E-TA2012 10DB N1 is a voltage-controlled attenuator, meaning that it is controlled by a voltage level. It is a linear device, which means that it is capable of attenuating an input signal linearly, meaning that a given level of attenuation is applied to every frequency in the signal.The E-TA2012 10DB N1 has several uses in telecommunications applications. It can be used to reduce the strength of high-powered signals, which helps to reduce interference and noise. It can also be used to adjust the gain of a signal, allowing the user to control the balance between input and output levels. Additionally, it can be used to reduce cross-talks between different channels of a system.The E-TA2012 10DB N1 uses a basic resistor-capacitor network to control the flow of current in an analog signal. The resistor-capacitor network is composed of several resistors and capacitors arranged in a particular configuration. When the signal is passed through this network, the resistors oppose the flow of current, while the capacitors allow a certain amount of current to pass.The resistor-capacitor network is then connected to a voltage source, which is used to adjust the power level of the signal. By applying a voltage across the resistors, the user can control the flow of current through the network, thus controlling the power level of the signal.The E-TA2012 10DB N1 can be programmed to allow for multiple attenuation levels. This means that the user can adjust the power level of a signal according to specific needs. This makes the device an invaluable tool for many telecommunications systems, allowing for greater control over the power levels of signals.The E-TA2012 10DB N1 is a versatile device that can be used in a variety of applications. It is especially useful for reducing interference in telecommunications systems, and for adjusting the gain of signals. Its programmable nature also makes it a valuable tool for control applications.

The specific data is subject to PDF, and the above content is for reference