Allicdata Part #: | E-TA201210DBN2-ND |
Manufacturer Part#: |
E-TA2012 10DB N2 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 10 DB |
More Detail: | RF Attenuator 10dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW ... |
DataSheet: | E-TA2012 10DB N2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 10dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are passive electronic components used to reduce the power of a signal without distorting it. They are designed to absorb a certain amount of power while passing the remaining power to the load. The E-TA2012 10DB N2 attenuator is a useful electronic component that is designed to absorb a maximum of 10 dB of power with no signal distortion. This product is a low-frequency electrical filter and is used to reduce power from a signal without affecting its shape or frequency. It is manufactured from two sections: the filter and the attenuator.The filter section is designed to filter out any high-frequency signals in the signal before it reaches the attenuator section. This ensures only the desired low-frequency signals and/or power levels are reduced. The filtering process is done in two stages – a high-pass filter and a band-pass filter. The high-pass filter is designed to pass only signals above the cutoff frequency, and the band-pass filter is designed to pass only signals within the specified frequency range. The attenuator section is designed to attenuate the power of the signal. It is constructed using resistors and capacitors, which act as a dampening mechanism to reduce the power of the signal. The resistors create resistance to the power of the signal, while the capacitors store the power and release it gradually over time. This allows the signal to be reduced without distorting its shape or frequency. The E-TA2012 10DB N2 attenuator is designed to be used in applications such as audio, video, and communications systems. It is perfect for any application where a low-level signal must be reduced in order to prevent overloading or interference. It can also be used to reduce the noise level of an incoming signal, or to reduce the overall power level of an amplifier. In conclusion, the E-TA2012 10DB N2 attenuator is a useful tool for reducing the power of signals without distorting it. It is designed to be used in audio, video, and communications systems, and can be used to reduce the noise level of an incoming signal or the power level of an amplifier. This product is highly reliable and provides a consistent performance, making it an ideal choice for any application that requires signal reduction.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...