E-TA2012 10DB N3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are electrical components used in the processing of broadcast signals and audio production. They are designed to reduce the signal strength of the signal, allowing signals to be tailored to the desired level. In the case of E-TA2012 10DB N3, the attenuation is provided by a passive circuit and is adjustable over a range of 10dB.

The attenuator itself is composed of several components. Firstly there is the printed circuit board (PCB) which houses the main circuit and its components. Then there is a cover which houses the resistor and capacitor components, and a wire link to connect the terminal blocks to the PCB. Finally, there are terminal blocks where the power and signal lines are connected.

The working principle of the E-TA2012 10DB N3 is based on the principle of resistive attenuation. This type of attenuation involves the use of resistors to resist a portion of the signal and thereby reduce the strength of the signal. In the case of the E-TA2012 10DB N3, the attenuation is provided by a combination of five resistors for a total resistance of 10dB.

The resistors are connected in series with the signal line. As the signal travels along the line, it encounters each of the resistors and is attenuated by a process of electrical resistance. This means that the signal that exits the series resistors will have a lower amplitude than the original signal and hence, will be attenuated.

The E-TA2012 10DB N3 also employs an additional element: a potentiometer. This allows the user to adjust the level of attenuation, depending on the requirements of the signal being processed. A simple turn of the knob to the left or right will reduce or increase the attenuation. This feature makes the E-TA2012 10DB N3 best suited for applications where the level of attenuation must be finely adjusted for optimal signal performance.

The basic circuit of the E-TA2012 10DB N3 is quite simple and can be used in a variety of applications. For instance, it can be used as a transformerless attenuator in broadcast equipment or in audio mixers to control the level of input from sound sources. It can also be used in guitar amplifiers to control the distortion effect of the final output.

In conclusion, the E-TA2012 10DB N3 attenuator is a useful component for controlling the level of signal transmission. With its adjustable attenuation range of 10dB, it is suitable for a range of broadcast and audio applications. The use of a potentiometer in the circuit design allows users to accurately adjust the signal level and produces optimal performance in any given environment.

The specific data is subject to PDF, and the above content is for reference