Allicdata Part #: | E-TA201210DBN8-ND |
Manufacturer Part#: |
E-TA2012 10DB N8 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 10 DB |
More Detail: | RF Attenuator 10dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW ... |
DataSheet: | E-TA2012 10DB N8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 10dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are an important class of components used to reduce the strength of an electric signal. The E-TA2012 10DB N8 application field and working principle are one example of such components and demonstrate just how powerful a tool attenuators can be.
Electric signals may come in a variety of forms, including alternating current (AC) and direct current (DC). The amount of power that an electric signal carries is determined by its voltage, which can vary between a few millivolts to several thousand volts. Attenuators are used to reduce this voltage to a lower level, making them great for applications where safety and control are paramount.
Generally speaking, there are two fundamental types of attenuators. The main difference between them is that one type is passive, meaning that it does not require any external energy to operate. The other type is active, meaning that a power source is required for it to function. In this case, the E-TA2012 10DB N8 is a passive attenuator.
E-TA2012 10DB N8 attenuators are designed for use in AC circuits and can be used in a variety of applications. Generally, they are used for controlling the strength of electrical signals in a variety of fields, such as audio systems, telecommunications, radio and electronics production. Additionally, the E-TA2012 10DB N8 is also used to protect sensitive components in electrical equipment from overvoltage.
The working principle behind the E-TA2012 10DB N8 attenuator is relatively straightforward. It is made up of two resistors connected in parallel, between which the input signal flows. The resistors are designed in such a way that they reduce the voltage of the signal by a fixed amount, reducing the total power of the signal as it passes through the device. The output signal is then passed through a capacitor, which further reduces the power of the signal.
The key to the E-TA2012 10DB N8 application field and working principle is its ability to precisely control the voltage and power of an electric signal. The resistors in the device are carefully calibrated to reduce the voltage of the signal by a fixed amount, without any distortion or loss of quality. Additionally, the capacitor further reduces the power of the signal, adding an extra layer of protection to sensitive electronic components.
Overall, the E-TA2012 10DB N8 has proven to be an effective tool for controlling the power and voltage of electrical signals. It is a reliable and cost-effective solution for applications where safety and control are essential and its simple yet reliable design allows it to seamlessly integrate into existing systems and applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...