Allicdata Part #: | E-TA20121DBN3-ND |
Manufacturer Part#: |
E-TA2012 1DB N3 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 1 DB |
More Detail: | RF Attenuator 1dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 1DB N3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
E-TA2012 1DB N3 Application Field and Working Principle
The E-TA2012 1DB N3 attenuator is a cutting-edge radio frequency (RF) signal attenuation device used in a variety of radio, telecommunications, industrial, and navigation applications.
In radio applications, the E-TA2012 1DB N3 attenuator plays an important role in reducing signal strength in order to create functional adjustments while meeting RF transmission requirements. Such functional adjustments allow the user to effectively balance signals and ensure compatibility between different components. The attenuator also plays an important role in minimizing RF interference among multiple systems.
In telecommunications applications, the E-TA2012 1DB N3 attenuator works to combine and proportionally drop the signal level on multiple circuits. This contributes to reducing noise and distortion in the transfer of signals.
In industrial applications, the E-TA2012 1DB N3 attenuator helps to maintain signal strength by proportionally reducing it. This helps to reduce power consumption and avoid damages from overloading.
In navigation applications, the E-TA2012 1DB N3 attenuator can help reduce signal strength in order to minimize potential disruption of near-by navigation systems. This is especially important in the military, where absolute silence is an absolute requirement.
Working Principle of the E-TA2012 1DB N3 Attenuator
The basic working principle of the E-TA2012 1DB N3 attenuator is to provide precise, low noise, and low distortion control of RF signals. The E-TA2012 1DB N3 attenuator works by reducing incoming RF signals in accordance with its internal adjustment settings. It functions by employing efficient RF amplifiers and signal switching circuitry, which assists in the control and measurement of RF signals.
The E-TA2012 1DB N3 attenuator is capable of attenuating incoming signals by up to 12dB. It features an attenuation range of 1-12dB in 1dB increments and a signal bandwidth of 10 MHz. The attenuator is also equipped with an adjustable RF amplifier allowing signals to be adjusted with greater precision.
In addition, the E-TA2012 1DB N3 attenuator helps to ensure that signals remain within the intended bandwidth. This is accomplished by using a set of filters at its input and output stages. The filter also works to reduce the amount of noise generated by the attenuator.
Conclusion
The E-TA2012 1DB N3 attenuator is a versatile and reliable RF signal attenuation device. With its adjustable RF amplifier and filtering mechanisms, the attenuator can effectively reduce signal strength while ensuring compatibility among a range of radio, telecommunications, industrial, and navigation applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...