Allicdata Part #: | E-TA20121DBN6-ND |
Manufacturer Part#: |
E-TA2012 1DB N6 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 1 DB |
More Detail: | RF Attenuator 1dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 1DB N6 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
An attenuator is an electronics device that is installed between an electrical signal source and a load. An attenuator reduces or limits the power of the signal in order to reduce the overall signal strength, preventing overload. Attenuators can have a wide range of applications and devices can be configured with different types to meet different needs. The E-TA2012 1DB N6 attenuator is a specialised type of attenuator designed for specific industrial applications, such as radio frequency signal distribution, ADSL broadband distribution and telecommunications applications.
The E-TA2012 1DB N6 attenuator is a reduction double balanced device which reduces the signal level of an incoming electrical signal by 1 dB. It works by attenuating the incoming signal to a predetermined level and then passing the reduced signal on to its load. The device is employed in a variety of signal applications and is used to reduce signal levels to prevent overload of the system or device. The device is ideal for protecting against signal overloads in both low impedance and high impedance systems.
The E-TA2012 1DB N6 attenuator consists of two main components, a filter and a transformer. The filter is used to reduce the high frequency signal and the transformer is used to reduce the low frequency signal. The two components together form a double balanced attenuator, which is designed to provide a reliable level of attenuation over a wide range of frequency. The transformer is shielded to ensure that there are no electromagnetic interferences between the signal and the transformer.
The E-TA2012 1DB N6 attenuator has a range of adjustable settings which can be adjusted to ensure that the signal level is reduced to the desired level. By adjusting the gain control, users can control the level of attenuation they require and make sure that the signal remains within the acceptable level for their applications. The device is also equipped with a thermistor, which can be used to sense temperature fluctuations and protect the device against excessive temperatures.
The E-TA2012 1DB N6 attenuator is a highly efficient device for reducing signal levels and boosting signal strength. It is ideal for protecting against signal overloads in both low impedance and high impedance systems. The adjustable settings and thermistor protection provide a reliable and dependable solution for reducing the signal levels, protecting against signal overloads and boosting signal power.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...