Allicdata Part #: | E-TA20121DBN8-ND |
Manufacturer Part#: |
E-TA2012 1DB N8 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 1 DB |
More Detail: | RF Attenuator 1dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 1DB N8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are often used in some everyday applications, such as public address systems, musical instrument amplifiers, scientific and medical equipment. They are also used in many radio and television broadcasting facilities. An attenuator is a device that reduces the amplitude of a signal by an absolute value.
The E-TA2012 1DB N8 is a type of attenuator designed to control signals at very high frequencies. It is typically used in digital communications systems, audio and video equipment, and other applications that require accurate signal control. The device has a rated power of 2 watts, a frequency range of 50 MHz to 4 GHz, and a maximum operating voltage of 500 V.
The E-TA2012 1DB N8 is designed with a differential input and a single ended output, enabling it to be used in either a single ended or differential mode. Its design also allows for automatic calibration of frequency and power, as well as remote monitoring and control over the air. This makes it more efficient than other types of attenuators which require manual calibration. The device also features a wide operating temperature range of -20 to +80°C.
At the heart of this attenuator is a special microelectronic circuit that enables it to accurately measure and control the output signal. The circuit consists of two components: a voltage divider and an amplifier. The voltage divider is used to provide a reference voltage to the amplifier which will then regulate the output signal’s voltage according to the input signal. When the input signal is increased, the voltage of the output signal decreases and vice versa.
The E-TA2012 1DB N8 can be used in a variety of applications. It is mainly used in radio broadcasting applications, as it allows for precise and accurate control of the output signal. It is also used in digital communications systems and video distribution systems. Its wide operating temperature range makes it suitable for use in many different environments.
The E-TA2012 1DB N8 is a reliable and efficient device that provides accurate signal control in a wide range of applications. Its wide operating temperature range makes it suitable for use in many different environments. Its high accuracy and automatic calibration features make it ideal for digital communications systems, audio and video equipment, and other high frequency signal applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...