![E-TA2012 2DB N2 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
Allicdata Part #: | E-TA20122DBN2-ND |
Manufacturer Part#: |
E-TA2012 2DB N2 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 2DB 0805 SMD |
More Detail: | RF Attenuator 2dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | ![]() |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 2dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are essential in a wide range of engineering applications. One particular type of attenuator is the E-TA2012 2DB N2. This attenuator has uses in many fields, and it is important to understand the working principles behind it.
The main purpose of an attenuator is to reduce the level of signals. It does this by providing a path or circuit where the signal level can be adjusted or attenuated. The E-TA2012 2DB N2 has two main sections. The first section is a voltage divider. This is the circuit that reduces the signal level. The second section is the power amplifier. This is the circuit that amplifies the signal level back up to the original levels. It is important to understand how each section works in order to understand the overall functioning of the E-TA2012 2DB N2.
The voltage divider is the primary section of the E-TA2012 2DB N2. This circuit is composed of two elements: a resistive element and a reactive element. The resistive element is typically a resistor, and the reactive element can be either a capacitor or an inductor. The resistive element of the voltage divider is responsible for providing the load resistance, which is used to control the signal level. The reactive element is responsible for providing a reactance, which helps to control the signal level by creating an additional impedance. Together, these two elements work together to reduce the signal level before it passes to the power amplifier.
The power amplifier is the secondary section of the E-TA2012 2DB N2. This circuit is usually composed of an amplifier, which is responsible for boosting the signal back up to the original levels. The amplifier is designed to provide a low output impedance, which helps to maintain an even signal level throughout the signal path. Additionally, the amplifier is designed to provide higher power output, which is necessary for amplifying complex signals. Together, the voltage divider and power amplifier work together to maintain a signal level that is at the desired level.
In conclusion, the E-TA2012 2DB N2 is an example of a wide range of attenuators that offer highly advantageous signal level control solutions. The main purpose of the E-TA2012 2DB N2 is to reduce the level of signals by providing a path or circuit where the signal level can be adjusted. This is achieved by using a voltage divider and a power amplifier that work together to maintain the desired signal level. Additionally, the power amplifier helps to boost complex signals up to the original levels. By understanding the working principles of the E-TA2012 2DB N2, engineers can optimize their application’s signal level control potential.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
![HMC939LP4E Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
![ATT-0225-60-TNC-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
![M3933/17-09N Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
![E-TA3216 T 2DB N6 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
![AT-206(40) Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)
RF ATTENUATOR 7DB SMA MODULERF Attenuato...
![ATT-0276-07-SMA-02 Allicdata Electronics](https://files.allicdata.com/upload/common/default.jpg)