E-TA2012 2DB N3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are a type of device that is designed to reduce the level of an electrical signal without fundamentally distorting the signal. The E-TA2012 2DB N3 is a type of variable attenuator typically used in radio frequency (RF) applications. This organization will discuss the application field and working principle of the E-TA2012 2DB N3 attenuator.

Overview of the E-TA2012 2DB N3

The E-TA2012 2DB N3 is a surface-mount waveguide attenuator specifically designed for use in the 3 gigahertz (GHz) frequency range. This type of device is designed to provide an attenuation that is linear over the 3 GHz frequency range so that signal distortion will be minimized. The typical insertion loss of the device is approximately 0.3 dB/GHz, with a maximum insertion loss of 1dB. The device is designed to operate in ambient temperatures as high as 125°C (257°F).

Application Fields of the E-TA2012 2DB N3

The E-TA2012 2DB N3 is suitable for many different areas of RF signal processing including antenna systems, radio base stations, anti-jamming systems, signal intelligence applications, and point-to-point radio link systems. The device offers an excellent insertion loss performance as well as a low insertion loss, making it suitable for a wide range of applications. Additionally, due to its small size and ruggedness, the device can be installed in a wide range of environments including backyards, buildings, ships, and other locations.

Working Principle of the E-TA2012 2DB N3

The E-TA2012 2DB N3 operates on the principle of waveguide attenuation. This is the process whereby an RF signal travels through an enclosure filled with a dielectric material. As the signal passes through the material, some of the signal energy is absorbed, resulting in an attenuation. The attenuation of the signal is dependent on the type and amount of the dielectric material, as well as the length of the waveguide.

In the case of the E-TA2012 2DB N3, the device is equipped with a printed circuit board which contains a number of resistors. Each resistor is connected to one of the four pins, and the amount of resistance is adjustable via a screwdriver. When the device is in use, the signal passes through the resistors and is attenuated accordingly. The device can be adjusted to provide varying amounts of attenuation, making it suitable for a wide range of applications.

Conclusion

The E-TA2012 2DB N3 is a variable attenuator designed for use in the 3 GHz frequency range. This type of device offers an excellent insertion loss performance as well as a low insertion loss, making it suitable for a variety of RF signal processing applications. The device operates on the principle of waveguide attenuation, whereby the signal passes through a series of resistors and is attenuated accordingly.

The specific data is subject to PDF, and the above content is for reference