Allicdata Part #: | E-TA20122DBN5-ND |
Manufacturer Part#: |
E-TA2012 2DB N5 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 2DB 0805 SMD |
More Detail: | RF Attenuator 2dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 2DB N5 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 2dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic components used to reduce the signal strength in an electrical circuit. The E-TA2012 2DB N5 is an attenuator used to reduce the output signal of an amplifier. This attenuator is designed to reduce the maximum signal level of a device while maintaining a high signal-to-noise ratio. The E-TA2012 2DB N5 is a 2 dB, 5 W, ultra-low noise fixed attenuator. It has a 2 dB insertion loss and an excellent return loss.The attenuator is typically used to reduce the operating output level of a circuit, amplifier or transmitter that has too much gain. The E-TA2012 2DB N5 can be used to make minor adjustments to a circuit\'s gain-level without having to completely replace the amplifier or tweak the circuit design. This allows the user to tailor the output signal to exactly the desired level while avoiding the need to alter the circuitry. The attenuator can also be used in systems requiring multiple output levels. The device is also popular because of its low insertion loss and excellent return loss.The E-TA2012 2DB N5 is a 50 Ohm device, with a 2 dB attenuation at the center frequency of 2 GHz. The unit is rated for a maximum input power of 5 watts, meaning it can handle high-powered output signals. The attenuator maintains a low noise profile which allows it to be used in applications where noise reduction is critical. The attenuator can be used in both indoor and outdoor applications.The working principle of the E-TA2012 2DB N5 is based on the attenuation of the signal by an attenuator device. The device is designed with attenuation characteristics that cause a decrease in signal strength as the signal passes through it. Attenuation is typically measured in dB, with higher levels of attenuation resulting in weaker signals. The E-TA2012 2DB N5 is a 50 Ω attenuator device designed to provide 2 dB attenuation at 2 GHz, allowing it to be used in many different applications.The E-TA2012 2DB N5 can be used in a variety of applications, including cellular base stations, microwave radio systems, satellite communications, and CATV systems. It is used to reduce the output signal strength to reach certain levels or specifications. It is also used to reduce the output signal of amplifiers to prevent overloading or distortion of the signal. In addition, the attenuator can be used to reduce the output level of multiple transmitters in a system, allowing for more efficient operation of the system.The E-TA2012 2DB N5 is a high quality, low-noise attenuator device. It offers excellent performance and reliability, and is well-suited for both indoor and outdoor applications. It is an ideal choice for those looking to reduce the signal level or to tailor the signal to specific levels. The device is designed with an attenuation of 2 dB, offering excellent return loss and low insertion loss. It is a reliable, durable device that is capable of providing excellent signal performance in any application.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...