E-TA2012 4DB N2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators are devices that reduce the intensity of an electrical signal. The E-TA2012 4DB N2 application is an attenuator which is designed for use in RF communications in the frequency range from 1 to 6 GHz. This attenuator is primarily used for load sharing and to control the power of the signal.

The E-TA2012 4DB N2 attenuator is composed of two identical, high quality, high isolation switches. The attenuator can be used to reduce the amount of signal power, or to adjust the signal power to match a specific antenna gain. By adjusting the signal power, the attenuator can also be used to extend the communication distance.

The two switch component of the E-TA2012 4DB N2 adjusts the signal power which leads to the reduction in power. The switches allow precise control of the signal through a simple and reliable operating procedure. The switch is designed to operate in a variety of conditions including high signal frequencies, which allows the device to be used for various applications while providing consistent performance. The frequency range of the E-TA2012 4DB N2 is from 1 to 6 GHz and it also provides a high isolation performance up to 80 dB.

The E-TA2012 4DB N2 can be used for various applications, such as reducing the impact of signal noise, reducing the level of signal leakage, and for load sharing. In addition, this attenuator can extend the service life of antennas and other receiving hardware. The device is suitable for use in mobile networks, satellite receivers, fixed link systems, and a host of other applications. The compact and lightweight design of the E-TA2012 4DB N2 also makes it ideal for installation in tight spaces.

The working principle of the E-TA2012 4DB N2 attenuator is based on the use of two switches that are connected to the signal. When one of the switches is activated, the signal power is reduced by the amount of current supplied to the switch. This is done in a precise manner, allowing for reliable and accurate control of the signal power. The switches can also be used in combination to provide an even greater control of signal power levels. This is especially useful when the desired signal level is not achievable with just one of the switches.

The E-TA2012 4DB N2 attenuator is a reliable and easy to install device which is designed for use in a variety of conditions. The device provides precise control of the signal power and extends the service life of antennas and other receiving hardware. The attenuator has a wide frequency range and provides excellent isolation performance up to 80 dB. It can be used for a number of applications such as load sharing, reducing noise, and reducing signal leakage.

The specific data is subject to PDF, and the above content is for reference