Allicdata Part #: | E-TA20124DBN3-ND |
Manufacturer Part#: |
E-TA2012 4DB N3 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 4 DB |
More Detail: | RF Attenuator 4dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 4DB N3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic devices used to decrease the strength of an electrical signal. The E-TA2012 4DB N3 application field and working principle is a highly efficient attenuator that has a wide range of applications. It is used in a variety of applications such as power amplifiers, signal conditioners, audio and video processing devices, and communications devices.
The E-TA2012 4DB N3 attenuator is composed of two essential elements, the two resistors, and an adjustable control device. These two resistors are organized in such a way that they form a bridge circuit. The adjustable control device that is used is often a potentiometer. This device allows the user to adjust the resistance of the circuit and thus allowing to adjust the strength of the input signal.
The working principle of the E-TA2012 4DB N3 attenuator is quite straightforward. When an input signal enters the attenuator, it is directed through the bridge circuit. The input signal then passes through the two resistors of the bridge circuit and is then directed through the adjustable control device. The adjustable control device determines the amount of resistance that the signal will encounter, and thus the attenuation that the signal will experience. The strength of the signal is then reduced so that it can be more easily handled by the system.
The E-TA2012 4DB N3 attenuator is used in a variety of applications. It is commonly used in power amplifiers, signal conditioners, audio and video processors, communications devices, and consumer audio systems. In power amplifiers, the attenuator is used to reduce the input signal so that the amplifier can handle it more easily. In signal conditioners, the attenuator is used to reduce the signal swing so that it can be more easily processed. In audio processors, the attenuator is used to reduce the input signal level so that it can be fed into a digital audio processor. In consumer audio systems, the attenuator is used to reduce the input signal level so that it can be fed into a home stereo system without being distorted.
The E-TA2012 4DB N3 attenuator is a very efficient device with a wide range of uses. Its accuracy and reliability make it an ideal device for many applications. Its simple design, low cost, and easy installation make it an attractive choice for those seeking a reliable and cost-effective attenuator. With its many uses, the E-TA2012 4DB N3 attenuator is a device that is sure to be useful in many applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...