Allicdata Part #: | E-TA20124DBN4-ND |
Manufacturer Part#: |
E-TA2012 4DB N4 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 4 DB |
More Detail: | RF Attenuator 4dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 4DB N4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Specifications
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
E-TA2012 4DB N4 Application Field and Working Principle of Attenuators
Attenuators are electronic devices used to reduce a signal\'s strength, or “attenuate” it. As its name implies, E-TA2012 4DB N4 attenuator is specifically designed to reduce the strength of signals by 4 decibels. E-TA2012 4DB N4 device has a series of application fields, primarily in energy, wireless and audio transmission systems. It is also used for waveform distortion measurement and in radio transmission technology.The working principle of the E-TA2012 4DB N4 attenuator is based on the basic form of vacuum tubes or transistors, in which electrons take part in the circuit and the signals are connected through metal threads. The resistance of the device is what changes, depending on the voltage applied to the input port. The device works by effectively lowering the signal strength of an incoming signal. When the signal reaches the output port, it will have been attenuated.E-TA2012 4DB N4 attenuator consists of a transformer and a controlling wiring network. Its structure is mainly composed of the inner core substrate and two external copper electrodes. It also contains several resistors, capacitors, and inductors, all of which work together to decrease signal strength by 4 decibels.The placement of the E-TA2012 4DB N4 attenuator is important, as it is designed to be placed as close to the input signal as possible. This ensures that all the signal entering the device is attenuated and the output signal is properly adjusted. The device should also be placed after the signal amplifier and before any other audio or electrical components.The performance parameters of E-TA2012 4DB N4 attenuator include attenuation accuracy, impulse response, power dissipation, and more. Its impulse response should be less than 1 ms and the maximum power resistance should be below 400 W, or otherwise it can cause shorting or other damages to the device.In conclusion, the E-TA2012 4DB N4 attenuator is an important piece of hardware used in energy, wireless and audio transmission systems, waveform distortion measurement, and radio transmission technology. Its working principle is based on the vacuum tube and transistor form, using resistors, capacitors, and inductors as its basic components. Its performance criteria include attenuation accuracy, impulse response, and power dissipation, all of which should be strictly adhered to for optimal results.The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC939LP4E
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
ATT-0225-60-TNC-02
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
M3933/17-09N
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
E-TA3216 T 2DB N6
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
AT-206(40)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
ATT-0276-07-SMA-02
RF ATTENUATOR 7DB SMA MODULERF Attenuato...