Allicdata Part #: | E-TA20125DBN4-ND |
Manufacturer Part#: |
E-TA2012 5DB N4 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 5 DB |
More Detail: | RF Attenuator 5dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 5DB N4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 5dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic components used to reduce signal strength, typically in radio, television, and telecommunications systems. The E-TA2012 5DB N4 is one such attenuator, whose application field and working principle are as follows.
The E-TA2012 5DB N4 is a broadband, high power, absorbing attenuator, designed to handle high frequency signals up to 6GHz. It is used primarily in cellular base stations and other radio systems, for which it reduces gain in downconverter systems, minimizing signals from secondary antennas and input overloads. It is also used for testing cellular radio systems, for which it will reduce one compared to the other of two networks.
The E-TA2012 5DB N4 is made up of a 12-section substrate (thick film) attenuator mounted on a printed circuit board (PCB). Each section consists of two electrodes which together form an electromagnetic field. This field creates an absorption between the two electrodes, which reduces the signal strength.
In operation, the E-TA2012 5DB N4 receives the signal from the input and the signal is divided into two halves - one passes through the attenuator and the other bypasses the attenuator. As the signal passes through each section of the attenuator, the signal is weakened by the absorption process, until the final output is at the required level. The attenuation level can be controlled by adjusting the voltage applied to the electrodes, allowing the signal strength to be adjusted to the desired level.
The E-TA2012 5DB N4 attenuator is used in a variety of applications in radio, TV and telecommunications systems. It is used to reduce interference from secondary antennas and to minimize incoming signals from source devices, such as mobile phones, and to control signal power in cellular base stations. It is also used for testing cellular radio systems, reducing one compared to the other of two networks. In addition, it is used in communications receivers, to reduce the signal strength of incoming signals before they are received. The E-TA2012 5DB N4 is also utilised in antenna systems, to attenuate signals in order to reduce the amount of power transmitted.
The E-TA2012 5DB N4 attenuator is a reliable and efficient device, which has proven to be a versatile, cost-effective solution for a wide range of applications. It is easy to install and maintain, making it a popular choice for radio, TV and telecommunications systems.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...