Allicdata Part #: | E-TA20125DBN6-ND |
Manufacturer Part#: |
E-TA2012 5DB N6 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 5 DB |
More Detail: | RF Attenuator 5dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 5DB N6 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 5dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are a type of resistor that can reduce the amplitude of a signal. They are commonly used to reduce the power of a signal to the proper level for a given purpose. In the telecommunication and audio industries, they are used to balance the power between different components. They are also used in radio transmitters to reduce the signal strength before it reaches the antenna.
The E-TA2012 5DB N6 is an example of an attenuator. This particular model is a low-power adjustable linear attenuator designed for use in CATV systems. It is designed to reduce the amplitude of CATV signals by up to 5dB.
The E-TA2012 5DB N6 is a passive device that operates on the principle of resistive attenuation. It works by combining two parallel resistors of different values such that the total impedance is greater than the impedances of the individual resistors. For example, if the two resistors have values of 500 and 200 ohms respectively, their combined value will be 700 ohms. This higher value will act as a resistor to the signal, and will reduce its amplitude accordingly.
The E-TA2012 5DB N6 is designed to be adjustable, allowing the user to set the amount of attenuation for their particular application. There are two adjustment knobs on the attenuator, which can be used to control the total impedance in order to produce the desired amount of attenuation. An additional benefit of this device is that it can also be used as an equalizer, as it offers the user the ability to adjust the total impedance in order to correct for any frequency-dependent amplitude variations.
The E-TA2012 5DB N6 is a useful tool for anyone who needs to reduce the amplitude of a signal in a CATV system. Its adjustable nature makes it especially useful for applications where the exact amount of attenuation required is unknown. It is also a cost-effective solution for low-power signal processing, as its adjustable nature allows the user to find the exact amount of attenuation required without purchasing multiple devices. All in all, the E-TA2012 5DB N6 is an excellent attenuator for any low-power signal processing application.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...