Allicdata Part #: | E-TA20126DBN1-ND |
Manufacturer Part#: |
E-TA2012 6DB N1 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 6 DB |
More Detail: | RF Attenuator 6dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 6DB N1 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Specifications
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 6dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction:The E-TA2012 6DB N1 attenuator is a device that reduces the amplitude of a signal by a certain degree. It is designed for use in applications such as radio frequency (RF) transmission and RF amplifiers. This article will discuss the application field and working principle of the E-TA2012 6DB N1 attenuator.Application Field:
The E-TA2012 6DB N1 attenuator has a wide range of applications, especially in RF transmission and RF amplifiers. It is designed for use in applications such as antenna matching, voltage dividers, RF power dividers, power amplifiers, video amplifiers, satellite communications, CATV systems, and more. The device is also often used in applications that require providing the minimum amount of signal for a specific purpose, such as providing the minimum acceptable signal strength for a receiver.Working Principle:
The E-TA2012 6DB N1 attenuator works on the principle of attenuating the incoming signal. It works by attenuating the signal amplitude without distorting the signal in any way. The device is designed to reduce the signal amplitude by 6dB, thus providing the desired signal strength.The E-TA2012 6DB N1 attenuator uses an integrated circuit (IC) that works in two stages. The first stage of the IC takes the incoming signal and reduces its amplitude by 6dB. In the second stage, the reduced signal is then passed through a high frequency filter to ensure that it is within the desired frequency range. The filter also eliminates any frequencies that are outside the operating range of the device. The output signal is then ready for use.Conclusion:
The E-TA2012 6DB N1 attenuator is an important device in the field of RF transmission and RF amplifiers. It is a device that reduces the amplitude of incoming signals by 6dB without distorting it in any way. The device works in two stages, with the IC taking the incoming signal and reducing its amplitude by 6dB and then passing it through a high frequency filter. The device is very useful for providing the minimum acceptable signal strength for receivers and is used in a wide range of applications.
The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC939LP4E
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
ATT-0225-60-TNC-02
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
M3933/17-09N
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
E-TA3216 T 2DB N6
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
AT-206(40)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
ATT-0276-07-SMA-02
RF ATTENUATOR 7DB SMA MODULERF Attenuato...