E-TA2012 7DB N1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The E-TA2012 7DB N1 is an attenuator that is designed for use in an array of applications, including such as, RF circuits, millimeter wave communications, medical and laboratory instruments. As the name suggests, it is an attenuator that has a nominal value of 7 db.

Attenuation is a term used to describe the reduction in the power or intensity of a signal. Attenuators are circuit components used to reduce the power of a signal without distorting the signal waveform. This is achieved by either inserting them in a signal path, or by controlling the level of a connection between two circuit nodes. Attenuators are categorised by their insertion loss (IL) and Maximum attenuation (MaxA).

E-TA2012 7DB N1attains its maximum attenuation at 7dB. This attenuator is a bilateral passive device, which does not introduce any energy into the signal path. It has a nominal operating frequency range from 0 MHz to 18 GHz. The nominal input/output impedance is 50 ohms. The RF connector type has been designed to SMA-female. Moreover, the VSWR is lower than 1.8:1 and IL 0.4.

The E-TA2012 7DB N1 attenuator is designed to reduce the attenuation of signals in the 0 – 18 GHz range. This is achieved by the insertion of a series of resistive elements into the signal path. The resistive elements absorb some of the power from the signal, thereby reducing its level. This type of attenuator offers good frequency response and low noise, making it ideal for precision measurement and test equipment. It is also well-suited for use in a number of RF-engineering applications.

In terms of its working principle, the E-TA2012 7DB N1 attenuator does not introduce any energy into the signal path and it consists of series-connected resistors. The series resistors absorb power which is proportional to the signal frequency, hence attenuating the signal. The signal power loss is given by the ratio of the component’s resistance (R) to its impedance (Z).

In typical applications, the E-TA2012 7DB N1 is employed to introduce a signal attenuation into the signal path. It is useful in providing precision control of signal amplitude, and can also be used for attenuating strong signals. This make it an ideal device for laboratory, RF engineering and communication applications. Moreover, the device offers excellent signal-tone linearity & noise performance, making it suitable for receiver-level signal conditioning.

The E-TA2012 7DB N1 attenuator is a state-of-the-art device that has been designed to reduce signal power levels at frequencies from 0 MHz to 18 GHz. This precision attenuator employs a series of resistive elements to achieve excellent signal attenuation, without introducing any energy into the signal path. This attenuator offers excellent linearity and noise performance and is ideal for RF engineering, laboratory and communication applications.

The specific data is subject to PDF, and the above content is for reference