Allicdata Part #: | E-TA20127DBN4-ND |
Manufacturer Part#: |
E-TA2012 7DB N4 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 7 DB |
More Detail: | RF Attenuator 7dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 7DB N4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 7dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The E-TA2012 7DB N4 attenuator is a highly precise, adjustable attenuator that is used to precisely adjust the power output of a transmitter in order to achieve the desired performance while avoiding overloading or outputting too much power. This attenuator is part of a range of products produced by the company E-TA2012 and is an ideal choice for those applications where precise control of the power transmission is needed.
The E-TA2012 7DB N4 attenuator is a high-gain, digital-step attenuator with an in-band return-loss value of +17 dBm over its entire operating frequency range. It has a dynamic range of up to -60 dB from 2 to 8 GHz with a typical insertion loss of 3 dB and can handle input and output levels up to +20 dBm. The unit is capable of attenuating signals in 1 dB steps over a range of 0 to -54 dB. This makes it ideal for applications where precise control of transmitted power is required.
In order to be able to control the power output accurately, the E-TA2012 7DB N4 attenuator is fitted with an advanced digital step attenuator. This attenuator uses a micro-controller to convert a digital value to an analog signal in order to vary the voltage controlling the attenuator. This voltage is then converted back to a digital signal after the attenuation has been adjusted. The system is also fitted with a power monitor which detects the input signal level and adjusts the attenuation accordingly to ensure that the signal does not overload.
The E-TA2012 7DB N4 attenuator is an ideal choice for applications where accurate control of the transmitted signal is required. Its high gain, high accuracy and low input and output levels make it an effective choice for a variety of applications and its adjustable attenuation settings make it easy to adjust the transmitted power to the desired levels. This makes the E-TA2012 7DB N4 attenuator an excellent choice for applications where precise power control is of the utmost importance.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...