Allicdata Part #: | E-TA20128DBN2-ND |
Manufacturer Part#: |
E-TA2012 8DB N2 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 8 DB |
More Detail: | RF Attenuator 8dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 8DB N2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 8dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
.Attenuators are electrical devices used to decrease the power level of an input signal. They are mainly used to adjust impedance matching between devices, reduce noise, isolate signals from sources, and improve frequency responses. The E-TA2012 8DB N2 is an attenuator designed to help electronic engineers meet their equipment requirements. It is made up of several components, and its working principle is based on the principle of ohmic losses.
The E-TA2012 8DB N2 consists of an array of twelve small resistors in a flat assembly that connected in series. It has a maximum wattage output of 8 watts and a nominal operating voltage of 12 volts or less. The total power dissipation of the E-TA2012 8DB N2 is 20 watts. The DC suppression of the attenuator is better than three dB. This device can be used for applications ranging from 140 kHz to 500 kHz.
The basic operation of the E-TA2012 8DB N2 involves electrical current against the resistors. When a voltage is pressed against one of the resistors, it creates an electric field that is then transmitted to the neighboring resistors. This electric field produces potential current flow between each resistor, which in turn produces a reduced output voltage. By controlling the resistance value of each individual resistor, a calibrated amount of voltage attenuation can be attained, allowing for precise control of the level of output voltage.
The E-TA2012 8DB N2 has excellent repeatability and reproducibility. The resistor values are all precisely adjusted to ensure that they are in the correct value within the +/-0.1% tolerance. This ensures that each device is able to produce the same exact level of attenuation regardless of the device’s age or environment.
Also, the E-TA2012 8DB N2 has superior frequency response. The frequency response ranges from 1 MHz to 10 MHz, ensuring that the device is able to accurately attenuate signals with wavelengths ranging from 11 to 1,000,000 Hz without any deterioration of the signal. This ensures that the device can accurately attenuate a variety of input signal levels and frequencies.
The E-TA2012 8DB N2 is an ideal device for applications that require precise, repeatable, and low-noise attenuation of signal power. It is used in a variety of applications including radio frequency (RF) and audio signal conditioning, radio signal selection and conditioning, as well as data transmission. Its excellent frequency response, power handling capability, and precision make it an ideal choice for electronics engineers.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...