Allicdata Part #: | E-TA20128DBN6-ND |
Manufacturer Part#: |
E-TA2012 8DB N6 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 8 DB |
More Detail: | RF Attenuator 8dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 8DB N6 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 8dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electrical components designed to reduce the power of a signal without significantly affecting its wave shape. They are very useful in a variety of applications, including calibrating laboratory testing and instrumentation, protecting sensitive equipment from voltage surges, matching impedance levels between components, and reducing the level of transmitted signals from microphones. The E-TA2012 8DB N6 is a particular type of attenuator used in telecommunications. This article will discuss the application field and working principle of the E-TA2012 8DB N6.
The E-TA2012 8DB N6 attenuator is primarily used to reduce the power of signals transmitted through telecommunication fibers. It works by introducing a fixed attenuation level between the transmitter and receiver, thus decreasing the power of the transmitted signal without significantly affecting its wave shape. This attenuator can be used to reduce the power of signals in fiber-optic communications, video signals, and other types of signal transmission. The E-TA2012 8DB N6 also works well in optical networks, since it is capable of attenuating the power of a signal over a range of frequencies.
The E-TA2012 8DB N6 features a very simple design, but works very effectively. It consists of an inner core and an outer shell, which are both made from high-quality materials. The inner core is made from stainless steel, while the outer shell is made from polycarbonate. This combination of materials makes the E-TA2012 8DB N6 extremely durable and resistant to external influences such as temperature, humidity, and corrosion. Additionally, the E-TA2012 8DB N6 is designed to be extremely easy to install in most standard telecommunications networks.
The working principle of the E-TA2012 8DB N6 is also quite simple. When the device is installed in a telecommunication network, it acts as a barrier between the terminal and the supplier of the signal. The device is then able to reduce the power of the signal by introducing a certain amount of attenuation. This means that the signal is still present, but is weaker than it would be without the device.
Additionally, the E-TA2012 8DB N6 features a two-way operation, meaning that it is capable of both transmitting and receiving signals. This is very useful for telecommunication applications, as it means that the device can be used both for transmitting and receiving signals with a single device. The E-TA2012 8DB N6 also features a built-in temperature monitor, which helps protect the device from overheating.
The E-TA2012 8DB N6 is a very effective and reliable device for attenuating signals in telecommunication applications. It is simple to install and use, and is capable of attenuating signals over a wide range of frequencies. Additionally, it features a built-in temperature monitor to ensure that the device does not overheat. This makes the E-TA2012 8DB N6 an ideal choice for attenuating signals in telecommunications applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...