Allicdata Part #: | E-TA20128DBN7-ND |
Manufacturer Part#: |
E-TA2012 8DB N7 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 8 DB |
More Detail: | RF Attenuator 8dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 8DB N7 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 8dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are devices which reduce the amplitude of an electrical signal without significantly distorting its shape. They are an important component of electronic systems for controlling power, noise, and signal level. The E-TA2012 8DB N7 Attenuator is a high-performance, low-noise, small-sized attenuator suitable for applications in the telecommunications, industrial, and signal processing fields. This attenuator has been designed with a wide frequency response, low insertion loss, and low input referred noise.
The E-TA2012 8DB N7 attenuator consists of a pair of 8DB low-current and low-voltage devices with symmetrical contacts for in/out connection. Each pair of these devices works in parallel to attenuate the signal level in 1:4 ratio. The output signal level can be adjusted from 0 to -8dB or -6 dB to -8 dB depending on the input level. The unique design of the E-TA2012 8DB N7 attenuator allows for a wide range of operating frequencies from DC to 6 GHz.
The E-TA2012 8DB N7 attenuator features an input termination which minimizes reaction to environmental noise and a high dynamic range up to 1, 200MHz. The low input referred noise of the E-TA2012 8DB N7 also provides improved signal accuracy and linearity. The device also has a wide temperature range which makes it suitable for automotive, industrial and military applications. Additionally, the device is designed to be easily integrated into line systems and are RoHS compliant.
The working principle of the E-TA2012 8DB N7 uses two low-current and low-voltage devices with symmetrical contacts for in/out connection. These devices work in parallel to attenuate the signal passing through them in a ratio of 1:4. The output signal is of equal amplitude but with reduced power. This power is determined by the various properties of the devices, such as noise, input referred noise, insertion loss, and frequency response, as well as the external environment.
The E-TA2012 8DB N7 attenuator is suitable for a wide range of applications such as telecommunications, industrial, and signal processing. The device is designed to reduce noise and distortions in hard-to-reach areas where signal level accuracy and linearity is important. This device provides reliable performance for applications where a wide range of frequencies is required. Additionally, the device is RoHS compliant and designed to easily integrate into existing systems.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...