E-TA2012 9DB N3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An attenuator is a type of passive device used to reduce the amplitude of an RF (radio frequency) signal without introducing any distortion to the waveform. The E-TA2012 9DB N3 attenuator is a high-performance unit with exceptional noise and frequency response characteristics. It is designed for use in commercial and professional radio frequency applications.

The E-TA2012 9DB N3 attenuator is a precision-made RF attenuator that can provide up to 9 dB of signal attenuation in the 0.5 to 1000 MHz frequency range. It is made from high-quality materials and features a small size, which makes it ideal for tight spaces and mobile applications. This attenuator is designed to operate with a wide range of load impedances and maintains a high level of isolation between the input and output. This allows it to function effectively in a wide range of applications.

The E-TA2012 9DB N3 attenuator is designed for use in commercial radio frequency applications, such as cellular and WLAN systems, as well as professional radio frequency applications such as broadcast and cable TV systems. It can be used as an adjustable attenuator in applications such as antenna gain control, interference suppression, signal attenuation and power amplifier testing. It is also suitable for use in monitoring systems and remote RF signals.

The operating principle of the E-TA2012 9DB N3 attenuator is based on the insertion loss principle. This principle states that as the RF signal passes through the attenuator, some of the energy is lost due to insertion loss. This is usually measured in terms of dB (decibels). The amount of insertion loss is determined by the attenuation setting.

The E-TA2012 9DB N3 attenuator consists of two precision-machined pins, which are separated by an air gap. The attenuation is determined by the size of this gap. As the attenuation is increased, more of the RF signal energy is lost. The maximum attenuation of the E-TA2012 9DB N3 is 9dB, which is an ideal amount for most applications.

The E-TA2012 9DB N3 attenuator is a high-quality attenuator with a wide range of applications in the RF industry. It is designed to operate reliably in a wide range of frequencies and can provide up to 9dB of signal attenuation. Its small size makes it suitable for use in tight spaces and mobile applications. Its high level of isolation between the input and output makes it a suitable choice for many professional radio frequency applications.

The specific data is subject to PDF, and the above content is for reference