Allicdata Part #: | E-TA20129DBN4-ND |
Manufacturer Part#: |
E-TA2012 9DB N4 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 9 DB |
More Detail: | RF Attenuator 9dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 9DB N4 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 9dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are important components in many electronic systems, since they allow signal level adjustments to take place without distorting the signal. The E-TA2012 9DB N4 attenuator is one of the more popular models used in electronic systems. It is a general purpose attenuator with a frequency range of 500MHz to 6GHz and an insertion loss of 9dB.
The primary application of the E-TA2012 9DB N4 attenuator is to attenuate a signal, either to reduce its amplitude or to equalise a signal with multiple output levels. Attenuation is used in a variety of settings, such as in the communications industry, home entertainment systems, automotive systems, and many more. It is also used for testing and measurement of signals in laboratory settings.
The working principle of the E-TA2012 9DB N4 attenuator is based on the use of a matched pair of coupled transmission lines. It uses a special design combination of two 50Ω impedance stubs to create a three-port device. When the signal passes through the device, the amplitude of the signal is reduced and the power of the signal is decreased accordingly. The reduction in power is also known as attenuation.
The E-TA2012 9DB N4 attenuator is manufactured in a compact size to allow for easy installation in a variety of electronic systems. It is also easy to use and does not require any special equipment or tools for installation. The device also features a high quality construction for durability and reliability.
In terms of performance, the E-TA2012 9DB N4 attenuator provides a good level of signal attenuation with minimal distortion. It also has a low noise level, which ensures that the signal is accurately attenuated without any unwanted noise being added to the signal. The device also incorporates an overload protection circuit which prevents it from being damaged if the signal level is too high. The device also has good return loss and isolation characteristics, which prevents signal leakage from the attenuator into the device it is connected to.
The E-TA2012 9DB N4 attenuator is well-suited for a wide variety of applications and is an economical and reliable way to attenuate signals. It can be used in a variety of settings, such as communications networks, automotive systems, home entertainment systems, and laboratory testing. The attenuator\'s good performance and low cost makes it an attractive choice for many electronic systems.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...