Allicdata Part #: | E-TA20129DBN6-ND |
Manufacturer Part#: |
E-TA2012 9DB N6 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 9 DB |
More Detail: | RF Attenuator 9dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 9DB N6 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Bulk |
Part Status: | Obsolete |
Attenuation Value: | 9dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are commonly used components in electronic circuits, and the E-TA2012 9DB N6 is an example of such a device. It is a passive two-port network designed to reduce the power of an input signal, with a nominal impedance of 50 Ohms. In this article, we will discuss its application field and working principle.
Application Fields
E-TA2012 9DB N6 attenuators are designed for use in RF and microwave communications, where low power signals are used. They are commonly used in radio and television systems, which require precise signals to be transmitted at a certain power level, typically around 5 to 20 dBm. The E-TA2012 9DB N6 attenuator is designed to reduce the power of a signal to that level, while still maintaining its signal fidelity. They can also be used in other fields, such as in the broadcast of low power signals from beacons or for power metering in RF circuits.
Working Principle
The E-TA2012 9DB N6 is based on the principle of RF impedance matching, where the two ports of the attenuator are impedance matched over a certain frequency range. The output port of the attenuator is impedance matched to the input port, such that the input signal is attenuated by a controlled amount. This passive attenuator operates on a single voltage source, making it a low-cost option for applications where the signal needs to be reduced slightly. It is also designed to be highly integrated, meaning that it can be easily incorporated into existing circuits without the need for additional components.
Conclusion
The E-TA2012 9DB N6 attenuator is a versatile device that is designed for use in RF and microwave applications. It is a low-cost, highly integrated component that can be used to reduce the power of a signal, while still maintaining its signal fidelity. By understanding the application field and working principle of the E-TA2012 9DB N6 attenuator, engineers can easily incorporate it into existing circuits.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...