E-TA2012 T 10DB N2

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Attenuation Value:	10dB
Frequency Range:	0Hz ~ 3GHz
Power (Watts):	63mW
Impedance:	50 Ohms
Package / Case:	0805 (2012 Metric)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Attenuators

An attenuator is an electrical component that is used to reduce the strength of an input signal. It works by using resistors, capacitors, or inductors to decrease the magnitude of the signal. Attenuators are used in a variety of applications including telecommunications networks, sound systems, and television equipment.

E-TA2012 T 10DB N2 Application Field and Working Principle

The E-TA2012 T 10DB N2 is an attenuator commonly used in analog telecommunications networks. It functions as a passive resistor network and is specifically designed to reduce the input signal level to the desired output level.The E-TA2012 T 10DB N2 attenuator consists of an array of resistors arranged in a ladder configuration. The resistors are connected in parallel and the input signal is then applied to the resistor array. The signal is then reduced in magnitude by the resistors according to the ratio of the resistor values.The E-TA2012 T 10DB N2 attenuator is commonly used in telecoms networks, where it is used to adjust signal levels in both the transmit and receive paths. It can also be used in sound systems and television equipment, where it is used to adjust the output of microphones or other transducers.The E-TA2012 T 10dB N2 attenuator is relatively easy to install and configure. It is a passive device, so no power supply is required. It is also relatively inexpensive, making it a cost-effective solution for many applications.

Conclusion

The E-TA2012 T 10DB N2 attenuator is a cost-effective solution for many applications, including telecommunications networks, sound systems, and television equipment. It is a passive device that utilizes an array of resistors to reduce the signal level of an incoming signal. It is easy to install and configure and requires no external power supply.

The specific data is subject to PDF, and the above content is for reference