Allicdata Part #: | E-TA2012T10DBN8-ND |
Manufacturer Part#: |
E-TA2012 T 10DB N8 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 10 DB |
More Detail: | RF Attenuator 10dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW ... |
DataSheet: | E-TA2012 T 10DB N8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 10dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are an important part of the transmission systems. In order to maintain the performance of the overall system, they must be designed to provide the required level of signal attenuation. The E-TA2012 T 10DB N8 attenuator is a network designed to provide a very specific level of attenuation. This unit is commonly used in communication links, including satellite and wireless communications.
The E-TA2012 T 10DB N8 attenuator is a two-part design. The first part is a resistive voltage divider, which is used to create a voltage difference between the input and output of the unit. This voltage difference is used to create a signal attenuation. The second part of the unit is an inductor, which is used to create a variable resistive component to the voltage divider. This inductor, in combination with the resistive elements, creates the desired level of signal attenuation.
The primary application of the E-TA2012 T 10DB N8 attenuator is in communication systems where a certain amount of signal attenuation is required for proper operation. It is also used in systems where a signal level must be kept constant, such as in a radio system. In these systems, the attenuator is used to maintain a constant signal level, independent of the ambient noise.
The working principle of the E-TA2012 T 10DB N8 attenuator is based on the same principles used in voltage dividers. In this design, a voltage divider is used to create two circuits with different voltages. The difference between the two circuits is used to attenuate the signal. The variable resistor is used to adjust the level of voltage difference, which changes the amount of signal attenuation.
The E-TA2012 T 10DB N8 attenuator is a reliable and effective device for signal attenuation, as it offers a consistent level of attenuation and is easy to configure. It is an ideal choice for any system that requires a specific amount of signal attenuation. The device is also highly durable, making it a cost-effective solution for applications where a reliable and consistent level of signal attenuation is required.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...