Allicdata Part #: | E-TA2012T1DBN2-ND |
Manufacturer Part#: |
E-TA2012 T 1DB N2 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 1 DB |
More Detail: | RF Attenuator 1dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 1DB N2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The E-TA2012 T 1DB N2 is a high-performance attenuator product released by E-TA. It is designed primarily for use in demanding radio frequency (RF) and microwave-frequency applications that require fast and reliable power control. The attenuator provides excellent performance in both static and dynamic situations while providing a wide range of settings that can be adjusted as the system’s operating conditions change.
The E-TA2012 T 1DB N2 attenuator is based on a linear attenuator design, which is an essential component of any wireless system. It is used to reduce the impact of the desired signal on the receive antenna, as well as control the power of the transmitted signal. The device is also commonly used to reduce interference from interfering signals.
The E-TA2012 T 1DB N2 is designed to operate over a wide range of frequencies, from 10 MHz to 2.4 GHz, with a particularly wide range of power settings from -90 to -15 dBm. It is also able to maintain its performance over a wide variety of temperatures and humidity conditions.
The device consists of a free-standing structure, with a built-in high-power resistor and thermistor that allow for fine-tuning of the power adjustment. This resistor is embedded in a flowing liquid and can be adjusted using a variety of tools, such as a screwdriver or a switch. Additionally, the device contains a built-in temperature compensation circuit to ensure the accuracy of the power adjustment.
The operating characteristics of the E-TA2012 T 1DB N2 are further enhanced by its high linearity, low distortion, and excellent RF isolation. The low impedance of the resistor ensures that maximum power is available from the device, without introducing distortions or undesired harmonics. The high linearity ensures that the device can handle strong signals without compromising its accuracy.
The E-TA2012 T 1DB N2 is designed to be easy to integrate into a variety of systems. It can be integrated as a single unit, or it can be embedded into a larger system. It can be mounted directly on the antenna system or it can be mounted on a separate mounting plate. Additionally, it can be placed in a remote or in-line location, depending on the application.
The E-TA2012 T 1DB N2 is a reliable and cost-effective attenuator solution. It is designed for a wide range of applications, from radiofrequency, microwave, and other communications applications. It is an ideal choice for any system that requires reliable and accurate power control.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...