Allicdata Part #: | E-TA2012T1DBN3-ND |
Manufacturer Part#: |
E-TA2012 T 1DB N3 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 1 DB |
More Detail: | RF Attenuator 1dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 1DB N3 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 1dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are electronic components used to reduce the intensity of an electrical signal without distorting its waveform. The E-TA2012 T 1DB N3 attenuator is designed specifically for use in applications such as telecommunications, CATV, and satellite communications. This device utilizes two high performance, low insertion loss GaAs semiconductor integrated circuits to offer a high level of attenuation with low distortion. In addition, the E-TA2012 T 1DB N3 attenuator is very stable and reliable, offering a long operational life.
The E-TA2012 T 1DB N3 attenuator operates on the principle of variable impedance. This type of attenuator uses a variable resistance to control the size of the electrical signal. When the resistor is made larger, the impedance increases, causing the signal to become smaller or attenuated. By changing the resistance, the signal can be precisely attenuated to the required level.
The E-TA2012 T 1DB N3 attenuator has many advantages over other attenuators, particularly for use in RF applications. Firstly, it is designed to have a very low insertion loss, making it ideal for applications requiring low power or noise. Secondly, the impedance levels can be easily adjusted using external components. Finally, it has good thermal stability, which is important for operating in a wide range of environmental temperatures.
The E-TA2012 T 1DB N3 attenuator is widely used in telecommunications, CATV, and satellite communications applications. In telecommunications, it is used to reduce the strength of a transmitted signal to prevent interference with nearby systems. In CATV and satellite communications systems, the attenuator can be used to ensure that the signal strength remains within the desired parameters. Additionally, the E-TA2012 T 1DB N3 attenuator can be used to provide a stable, low-noise signal in RF applications such as cellular base stations.
The E-TA2012 T 1DB N3 is a reliable and cost-effective solution for applications requiring a low insertion loss, high performance attenuator. It can be used to reduce the signal strength in a variety of settings, from telecommunications to base stations. Furthermore, its adjustable impedance allows the signal to be precisely attenuated to the desired level. The E-TA2012 T 1DB N3 is an ideal choice for applications requiring a high performance, reliable, and cost-effective attenuator.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...