E-TA2012 T 1DB N7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Attenuators

Attenuators are electrical components used to reduce the electrical signal strength in a system or circuit. The most common type of attenuator, a resistor-based attenuator, works by decreasing the amplitude of the signal without introducing any additional distortion. Attenuators are used in a variety of applications ranging from radios and radar to audio and telecommunications.

A particular type of attenuator, the E-TA 2012 T 1DB N7, is designed to operate at a maximum frequency of 1GHz. It consists of two matched high-impedance resistors in a package measuring 3mm x 2mm and is mounted in an surface mount package. The device is designed for use in a wide variety of radio frequency (RF) applications. As well as providing gain control, the device provides rejection of unwanted signals that may be present in the ambient RF environment.

The device works by absorbing the unwanted signal energy. By adjusting the two identical resistors, it is possible to control the amount of signal that is absorbed. Adjustment is made by means of a single control pin on the device, which is capable of fine tuning the amount of signal absorption. The device is very effective in controlling the signal envelope levels in both the noise and the desired signal, allowing for improved control of the receiver\'s gain instability which can manifest itself in the form of spurious signals.

The device also provides excellent noise immunity. This allows the user to reduce or eliminate the need for additional shielding in the equipment that the attenuator is being used in. Furthermore, the two matched resistors on the device ensure that signal losses incurred due to the absorption process are very low. The device has been designed to operate at very high frequencies, making it an ideal solution for applications such as satellite and radar.

The device is also capable of controlling the modulation of the signal. This can be useful in the reduction of modulation distortion that can occur in some circuits. As an added benefit, the device can also act as a filter, reducing unwanted frequency components from entering the system. This is done by controlling the signal levels present in the modulator, as well as providing additional filtering elements such as low-pass, high-pass and rejection filters.

Overall, the E-TA 2012 T 1DB N7 provides an effective way to reduce the signal levels present in a circuit, while simultaneously providing improved noise immunity and offering additional features such as modulation control and noise filtering. Thus, it is perfect for applications such as radios, radar, audio and telecommunications networks which require precise signal control.

The specific data is subject to PDF, and the above content is for reference