Allicdata Part #: | E-TA2012T2DBN8-ND |
Manufacturer Part#: |
E-TA2012 T 2DB N8 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 0805 SMD 2 DB |
More Detail: | RF Attenuator 2dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 2DB N8 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Specifications
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 2dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Description
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Introduction
Attenuators are signal processing devices that reduce the amplitude of an electrical signal. They are often used in radio frequency communications to reduce the power of a signal without affecting its frequency, shape, or amplitude envelope. The E-TA2012 T 2DB N8 is a high-performance squelch attenuator that is capable of controlling the signal power input depending on the application requirements.Application Field
The E-TA2012 T 2DB N8 is used in a wide variety of applications including wireless communications equipment, radio receivers, cable and optical communications systems, defense and security systems, and broadcast systems. The attenuator is capable of attenuating signals over a wide frequency range from 150MHz to 1.2GHz, providing superior performance for high speed signal processing.The E-TA2012 T 2DB N8 can also be used for signal conditioning, such as reducing signal amplitude for low-noise applications or reducing the amplitude of high-power signals to comply with regulatory requirements. The E-TA2012 T 2DB N8 can also be used as a voltage variable attenuator in a variety of systems, providing adjustable gain control at high frequencies.Working Principle
The E-TA2012 T 2DB N8 is a bidirectional, voltage variable attenuator that works by varying the voltage applied to an impedance network. The impedance network is composed of two series capacitors, one series resistor, and one adjustable resistor. The amount of attenuation is determined by the ratio of the adjustable resistor to the fixed resistor.When the voltage applied to the adjustable resistor is increased, the resistance decreases, resulting in a lower impedance. This reduces the amount of attenuation and increases the gain of the signal. When the voltage is decreased, the resistance correspondingly increases, resulting in a higher impedance, more attenuation, and a lower gain for the signal.Conclusion
The E-TA2012 T 2DB N8 is a bidirectional, voltage variable attenuator designed for a wide range of applications, including wireless communications equipment, radio receivers, cable and optical communications systems, defense and security systems, and broadcast systems. Its ability to provide adjustable gain control makes it suitable for applications such as reducing signal amplitude for low-noise applications and for complying with regulatory requirements. The E-TA2012 T 2DB N8 attenuator works by varying the voltage applied to an impedance network composed of two series capacitors, one series resistor, and one adjustable resistor.The specific data is subject to PDF, and the above content is for reference
Latest Products
HMC939LP4E
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
ATT-0225-60-TNC-02
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
M3933/17-09N
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
E-TA3216 T 2DB N6
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
AT-206(40)
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
ATT-0276-07-SMA-02
RF ATTENUATOR 7DB SMA MODULERF Attenuato...