E-TA2012 T 3DB N5 RF/IF and RFID |
|
Allicdata Part #: | 563-1370-2-ND |
Manufacturer Part#: |
E-TA2012 T 3DB N5 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 3DB 0805 SMD |
More Detail: | RF Attenuator 3dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 3DB N5 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 3dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The E-TA2012 T 3DB N5 is a type of attenuator used in various electronic devices and systems. It is designed to reduce the amount of power or signal that passes through it, allowing for more precise control of the signal level. Attenuators are commonly used in a variety of fields, including telecommunications, audio engineering, and power electronics. In this article, we will explore the various applications and working principle of the E-TA2012 T 3DB N5.
Applications
The E-TA2012 T 3DB N5 is an ideal choice for applications that require precise control of the signal level. It is often used in telecommunication systems to regulate the signal levels, as well as in audio engineering and power electronics. In telecommunications, the attenuator is used to regulate the amount of power which is sent through a line, thus reducing interference and improving signal-to-noise ratio. In audio engineering, the device is able to reduce the amount of sound energy passing through the line, allowing engineers to craft a desired sound without overloading the system. Finally, in power electronics, the device is often used to reduce the current that is sent through a line, resulting in improved power efficiency and lower energy costs.
Working Principle
The E-TA2012 T 3DB N5 is a type of passive attenuator, which means that it does not require any power to work. Instead, it relies on the characteristics of the material it is made of to reduce the power or signal that passes through it. The exact material used will depend on the type of signal and power output required. Generally speaking, the device works by reducing the amplitude of the signal or power passing through it. This is achieved by absorbing some of the energy from the waveform. The device is also able to control the frequency of the signal, allowing for precise control over the levels.
The E-TA2012 T 3DB N5 is a highly precise device and is typically adjustable by 0.25dB increments. This allows engineers and technicians to easily adjust the output of the device. The device also has excellent common mode and excess gain rejection qualities, allowing for better performance in high-power and complex signal systems.
Conclusion
The E-TA2012 T 3DB N5 is a type of attenuator, and is often used in telecommunications, audio engineering, and power electronics. The device is designed to reduce the amount of power or signal that passes through it in order to allow for more precise control of the signal levels. It is a passive device which relies on the properties of the material it is made of in order to reduce the power or signal that passes through it. Finally, the device is highly adjustable and is typically able to be adjusted in increments of 0.25dB, allowing for precise control over the output.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...