E-TA2012 T 4DB N2 RF/IF and RFID |
|
Allicdata Part #: | 563-1372-2-ND |
Manufacturer Part#: |
E-TA2012 T 4DB N2 |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Nidec Copal Electronics |
Short Description: | ATTENUATOR 4DB 0805 SMD |
More Detail: | RF Attenuator 4dB ±0.5dB 0Hz ~ 3GHz 50 Ohms 63mW 0... |
DataSheet: | E-TA2012 T 4DB N2 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 4dB |
Frequency Range: | 0Hz ~ 3GHz |
Power (Watts): | 63mW |
Impedance: | 50 Ohms |
Package / Case: | 0805 (2012 Metric) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
Attenuators are devices used to reduce the amplitude of a signal. They can be used in a variety of applications and come in different forms. The E-TA2012 T 4DB N2 attenuator is an example of a commonly used attenuator.
The E-TA2012 T 4DB N2 is an integrated attenuator consisting of two sections: the first is a fixed attenuator with an adjustable attenuation of 0 dB to 4 dB, and the second is a variable attenuator with an adjustable attenuation of 0 dB to 31 dB. It is designed for use in a wide variety of applications, including radio frequency (RF) and microwave communication systems. The device operates using negative feedback, and is capable of reducing the amplitude of a signal by up to 35 dB.
Application Field
The E-TA2012 T 4DB N2 attenuator is designed for use in RF and microwave communication systems. It can be used for applications such as fixed attenuation, gain control, link balancing, signal level calibration and loss compensation. For example, it can be used to reduce the output of an antenna, thus improving reception and reducing interference. In addition, the device can also be used to adjust the input level of a signal, ensuring the desired signal-to-noise ratio.
Working Principle
The E-TA2012 T 4DB N2 attenuator operates using negative feedback. The device is based on a MOSFET transistors in a cascode configuration. The first stage coefficient is used to provide the high impedance configuration while the second stage is designed to provide high linearity and very low noise up to high frequencies. The device also features a wide bandwidth and wide dynamic range, allowing the user to accurately adjust the attenuation level.
The E-TA2012 T 4DB N2 attenuator is an important device in the field of RF and microwave communication systems. It is designed to provide reliable performance in a wide range of applications and environments. The device also provides excellent signal-to-noise ratios and helps to improve the overall performance of the system. In addition, the device is an affordable and reliable solution for ensuring signal quality.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...